How to make soap with your own hands recipes. How to make soap - video from YouTube. Various additives and fillers

Beginner soap makers are recommended to train on ordinary children's soap without additives or fragrances. If you are confident in yourself, then purchase professional soap base in specialized stores. They sell white, transparent and multi-colored bases with the addition of oils in packages of 250, 500 and 1,000 grams.

Mylce.ru

What to buy:

Base oil

It can be anything: coconut, almond, olive, castor, grape and apricot seeds. The oil consists almost entirely of organic compounds: fatty acids, vitamins, waxes, microelements, extremely beneficial for the skin.

Add no more than ½ teaspoon of oil to 100 g of soap base. An overdose of essential oils can cause severe allergies, and the soap will stop lathering.

There are many varieties of base oils, each of which has its own therapeutic effect and imbues homemade soap with skin-beneficial properties.

What to buy:

Single-color handmade soap can be made using water-soluble food dyes.

• Cocoa and coffee will make the soap chocolatey.
• Chamomile infusion will give the soap a yellow tint.
• Saffron and curry - bright yellow.
• Spinach, dill and parsley - green.
• Beet juice - red or pink.
• Chamomile essential oil - blue.

Do not use red rose petals (gives a dirty gray color) or hibiscus tea (gives a dirty green color) to create red shades.

Natural dyes have low light fastness and fade quickly in the sun. Therefore, such soap must be stored in a dark place.

For multi-color pour-over soaps, liquid or dry pigment is used in standard and neon shades. Pigment dyes produce bright, rich color and make the soap slightly matte. Before adding to the soap base, the dry pigment must be ground with oil or glycerin.

Mother of pearl, a mineral dye in powder form, gives homemade soap a beautiful shimmer and shine. It perfectly emphasizes the relief of the product. Mother of pearl is used in soaps with a transparent base and is applied to the surface of the product with a brush or fingertip.

This dye does not need to be pre-dissolved and is added dry to the molten base.

What to buy:

Supplements

To give homemade soap additional properties, various additives are used: glycerin, cream, honey, herbal infusions, dried flowers.

For example, during the preparation process you can add finely ground coffee, oatmeal, and ground nut shells to the scrub soap. Some of these compositions are easy to prepare yourself. But, for example, you will have to purchase bamboo or baobab fruit powder.

What to buy:

What tools are needed?

1. Heat-resistant containers with spouts that can be heated in microwave oven or in a water bath.
2. Silicone 2D and 3D molds for soap.
3. Alcohol for lubricating the surface of molds and better connection soap layers. The alcohol must be kept in a spray bottle with a volume of 30–150 ml.
4. Glass or wooden sticks for mixing the soap base.
5. Thermometer for liquids.

What to buy:

How to make homemade soap

Step 1

Prepare all the necessary components in advance: dyes, oils, fillers, and so on. Cut the soap base into small cubes and melt it in a water bath. Make sure that the base temperature does not rise above 60 °C. Otherwise, bubbles will form in the soap and its quality will deteriorate.

Step 2

When the soap base is completely melted, add any base oil you like, dye and one teaspoon of filler, for example, ground. In this case, coffee will act as a dye and give the product a deep chocolate shade.

Step 3

Pour the mixture into the mold, after sprinkling it with alcohol from a spray bottle. If you are working with several layers, then when pouring a new one, do not forget to spray the previous one with alcohol and lightly scratch its surface for better adhesion of the layers. The surface of the soap can be decorated with whole coffee beans.

Step 4

Place the mold in a cool place for 2 hours (never in the freezer!). Then remove the soap from the mold by letting it soak for a few minutes. hot water, and place on paper to dry for 1–2 days. The finished soap must be stored in breathable packaging. For example, in cling film.

Bonus: 4 homemade soap recipes

Homemade facial soap

• white soap base;
• 2 tablespoons lanolin oil;
• 1 teaspoon of any aromatic oil;
• 1 tablespoon of chopped oatmeal;
• 1 tablespoon ground almonds.

Chocolate and vanilla

• soap base;
• a few drops of vanilla essential oil;
• 1 teaspoon almond oil;
• 1 teaspoon ground coffee;
• a few drops of honey and ylang-ylang oil.

Strawberries and cream

• opaque soap base;
• ½ teaspoon olive oil;
• ½ teaspoon strawberry seed oil;
• red or pink dye;
• 2 tablespoons cream;
• strawberry and cream flavorings.

Pink dream

• white soap base;
• 1 tablespoon pink clay;
• 1 teaspoon apricot essential oil;
• 5 drops vanilla oil;

The demand for handmade foaming products is growing every day. Soap has gained popularity not only because it looks beautiful and unusual: this factor was also influenced by the fact that such products do not contain chemicals that can harm the skin.

Soap making at home for beginners - recipes

To make soap with your own hands, you don’t have to own a soap factory, because you can make personal hygiene products at home. Soap making for beginners involves several ways to create decorative products; they differ in the type of the main component - the base, into which you can then add natural dyes, scrubs or essential oils.

What are they made of?

The raw materials for obtaining the soap base can be animal and vegetable fats or fat substitutes: rosin, tall oil, synthetic fatty acids, naphthenic acids. Before making soap, you need to know that the process is based on the saponification reaction. This means that under the influence of alkalis, hydrolysis of fatty acid esters with glycerol occurs, and as a result, salts of alkali metals and fatty acids, trihydric alcohol, are formed.

What you need for soap making

After looking at all kinds of soap recipes and choosing the most suitable one from them, check whether you have all the necessary ingredients and equipment prepared:

• water (or other liquid required by the recipe);
• kitchen scales;
• two mixing dishes;
• hand and eye protection;
• oil, fat;
• caustic water;
• two thermometers;
• spoons for mixing and measuring;
• handmade soap molds;
• measuring cup;
• blender (if possible);
• disposable towels.

How to cook at home

There are several ways to brew your own personal care product:

1. Use a ready-made soap base (some recipes even recommend using remnants of old soap). The component is melted, ingredients are added to it according to the recipe, then new pieces are formed.
2. Rub with regular baby soap. Milk and water are added to the crushed mass, everything is melted together in the microwave (or a water bath is built), combined with the components indicated in the recipe and poured into molds.
3. Creation from scratch, i.e. without a foundation. The method implies that you can do it yourself natural soap handmade from glycerin, oils, alkali and other additives.

Liquid soap at home

The production of hygienic soap is a process whose technology must be followed. So, to cook it with your own hands, you need to prepare:

• a saucepan that is not used for culinary purposes;
• glycerin – 1 tbsp. l.;
• dyes (optional);
• essential oils (1 or 2 types) – 3-4 drops;
• soap base – 1 pc.;
• herbs (mint, chamomile, rose petals).

To make homemade soap, you need to carry out the following manipulations:

1. Prepare herbal decoctions: pour the mixture with 10 tablespoons of filtered water, boil the liquid for 2 minutes, leave for 30 minutes. Strain the infusion, add 10 glasses of water.
2. Grate a bar of baby soap until you end up with 1 cup of shavings. It is important to take a product without additives or other fillers.
3. Pour the broth into a saucepan and add the soap base there. Do not turn off the heat until the chips dissolve; it is important not to overcook the mass, otherwise it will not have the desired density. Cool the mixture, remove the foam, pour in glycerin.
4. Add essential oil to the solution (two types are possible). If you want the product to be colored, then a natural dye must be added at this stage.
5. Pour the prepared homemade liquid into a container with a dispenser.

From remnants

Step-by-step master class shows that the process of turning old remnants into a new original product (as in the photo) is not too labor-intensive. Knowing how to cook it from leftovers, you can create a natural product with an unusual airy texture. For preparation you will need:

• titanium dioxide diluted with glycerin (white dye);
• essential vanilla and rapeseed oil – 6 drops each;
• Santal – 3 drops;
• alcohol;
• transparent base – 120 g;
• soap remnants – 120 g.

Making a product like the one in the photo involves using chocolate and different colors. Find out how to make such an original product:

1. Separate the remnants. Part chocolate color grate. Mix the shavings with half the base, cut into small cubes.
2. Melt the workpiece by placing it on water bath and covering the container cling film.
3. Grease the silicone mold with rapeseed oil.
4. Pour the melted base into a glass, add vanilla oil and 0.5 tsp. rapeseed Beat the contents into foam using a mixer, then pour into the mold.
5. Melt the colored soaps with the remaining base in the same way. Pour the mixture too, mix with white dye, 3 drops of santal, 0.5 tsp. rapeseed oil. Beat until foamy.
6. Sprinkle the already hardened first layer with alcohol and pour the whipped foam on top. You can decorate with small shavings.
7. After all layers have hardened, remove the block from the tray and cut it.

Liquid household

Numerous positive reviews confirm that a homemade gel based on solid piece Laundry soap is an excellent option for washing even in a machine. To make it you will need:

• soda ash – 50 g;
• essential oil – 4 drops;
• grated soap mass - 0.5 tbsp.;
• water – 1 l.

The process of preparing homemade gel for washing things from any material is not at all complicated:

1. Send the soap shavings into the boiling water, without stopping stirring, wait until the product dissolves.
2. Add baking soda and mix the ingredients until a pearlescent jelly is formed.
3. Cool the mixture, drop a little essential oil.

Here is a description of the process for those who are interested in the topic of how they make laundry soap direct method:

1. Vegetable and animal fats are used as the basis.
2. The components are boiled in special digesters, then soda is added to them. The result is a viscous liquid - soap glue, consisting of glycerin and soap mass.
3. After hardening, it is cut and labeled. The numbers 40-70% indicate how many fatty acids are contained in one bar.

There is also an indirect method, which consists in treating the resulting adhesive soap with electrolytes. This is done using a solution of caustic alkali and sodium chloride. The consequence of the influence of these components is that the liquid stratifies. Top layer– soap core – contains about 60% fatty acids, and the bottom is an electrolyte solution with glycerin.

Making soap from scratch at home

Beginners who are interested in how to make soap without a soap base are recommended to start practicing with the cold method. The recipe data must be entered into the calculator - this way you can find out the exact ratio of alkali and water. So, to do this at home, you need:

• linseed oil – 10%;
• coconut and palm oil– 20% each;
• overfat – 7%;
• olive oil – 50%.

It is worth noting that superfat is added to protect human skin, and the oils in the composition react with alkali to form soap. How to do home product? Do everything step by step:

1. Measure out all the ingredients (without water and lye) by combining them in a saucepan. Melt at 50 degrees.
2. Place the required amount of lye in ice.
3. Make sure that the temperature of the alkali solution becomes the same as the temperature of the oils.
4. Using a sieve, pour the lye into the oil liquid, then beat the mixture with a blender until it becomes like cream.
5. Pour the liquid into the mold. You can do it beautiful inscription or draw a pattern. Once the product has hardened, it is ready for use.

From soap base

It’s worth making your own organic soap at least once, if only because it will moisturize your skin much better than what you buy in the store. Knowing the intricacies of the process, you can not only provide your family with natural hygiene products, but also make a gift set by tying the original products with a ribbon. To make soap at home you will need:

• essential oils;
• flavorings;
• soap base;
• alcohol;
• form;
• dyes.

The process of creating original soap, as in the photo, is not very complicated:

1. Prepare the base: grate or finely chop.
2. Melt the product by placing it in the microwave (experienced soap makers recommend placing the product in a water bath). Remember that it should not be allowed to boil.
3. Add oils and selected flavorings to the completely dissolved mass. Mix everything together.
4. Sprinkle the mold with alcohol, then pour the prepared soap mass into it.

How to make tar soap at home

This product is often used to treat lichen, various skin diseases, dandruff or psoriasis. You can buy this useful hygiene product in the store, but it’s very easy to make it yourself:

1. Mix 100 g of grated baby soap with half a teaspoon of honey, 5 drops of any essential oil, 10 ml of tar.
2. Leave the components in a water bath and wait for them to melt.
3. Pour the soap mixture into molds and leave for 3 days.

Soap Making Ideas

Most recipes for self-made Even a beginner in this field can use soap. Modern ideas for soap making help everyone who wants to create fragrant and harmless skin care products. The products can then be used for personal hygiene purposes or, having been beautifully decorated, given to loved ones just like that or on the occasion of a holiday.

With photo

You can create a wonderful product from an old photograph, dried flowers and a few other components:

• transparent base – 100 g;
• apple flavoring – 4 drops;
• hop sprigs with cones;
• titanium dioxide – 0.33 tsp;
• macadamia oil – 0.33 tsp.

The process consists of the following steps:

1. Print on water-soluble paper black and white photo, trim it according to the size of the mold.
2. Melt the base, adding flavoring and oils. Place the mold on the picture, pour a little soap mixture inside.
3. Using the image as a guide, place a hop branch on the bottom of the mold. “Drown” the cones so that they do not stick out.
4. Once everything starts to harden, spray with alcohol.
5. Pour a thin layer of base.
6. Place the photo in the form, turning it face down. The photo should be completely covered.
7. Remove the scales from the cones, pour them in, and mix.
8. Add titanium dioxide to the mixture to color the base, pour in the oil mixture and flavoring.
9. Sprinkle the cooled soap in the mold with alcohol and fill in the last matte layer. After hardening, carefully remove the product.

DIY scrub soap

A product that helps in the fight against cellulite or for skin care, which will additionally moisturize the skin, is easy to make yourself. The scrub is obtained by mixing the main (sour cream, honey, cream) and abrasive ( coffee grounds, finely ground apricot kernels) parts. For example, you can make your own coffee scrub from:

• bases – 180 g;
• sea ​​salt – 2 tbsp. l.;
• ground coffee or grounds - 2 tbsp. l.;
• olive oil – 2 tbsp. l.;
• boiled water – 0.5 tbsp.

Cooking steps should be performed step by step:

1. Melt the soap shavings, pour oil into the mixture first, then water in small portions. Stir the mixture all the time.
2. After a couple of minutes, the mass will become plastic and homogeneous.
3. Pour salt and coffee into it and stir.
4. Send the future soap into greased molds for 3 days. When you take it out, the bar should be dry and have a dense, uniform consistency.

Lavender

This product has bactericidal, relaxing and antiviral properties. Try making it from lavender oil, because it is not only healthy, but also has a wonderful, captivating aroma. To prepare you need to have:

• base – 100 g;
• mixture of oils (2-3 types) – 5 g;
• lavender flowers – 1 tsp;
• lavender essential oil – 15 drops.

The bar can be made into any shape you like, but before that the liquid needs to be properly prepared:

1. Melt the grated base by creating a water bath.
2. Add selected oils and dried plant flowers to the mixture.
3. Treat the silicone mold with alcohol and pour the resulting mixture into it.
4. Leave the liquid until it hardens, then remove finished goods and put them in a dry place. After 6 hours you can use it for its intended purpose.

With glycerin

Products can be poured into molds with any images, but first you need to prepare the following ingredients:

• mixture of oils (soybean, coconut, castor, safflower) - 800 ml;
• lye – 115 g;
• distilled water – 140 g.

Check out how to make your own glycerin soap step by step:

1. Add lye to water, stir. Let the solution cool to 65 degrees.
2. Heat the oil mixture to 57 degrees.
3. Combine the liquids and bring the mixture to a pudding consistency using a blender.
4. Keep the resulting mass warm for 3 hours. When the solution reaches the gel phase, it will appear translucent, like Vaseline. Stir.
5. Next, take some of the product and try to dissolve it in hot water. If it dissolves, you can continue. If it forms a lump or there are pieces floating on top, you need to let it sit longer.
6. Add 370 g of 70% alcohol and 85 g of liquid glycerin.
7. Combine 225g sugar and 140g water and cook until the sugar crystals are completely melted. Pour into soap base. Stir, cover, cool slightly.
8. Pour the soapy liquid into the molds, cover with film, and leave in a dry place for a week.
9. Cut the bars into pieces.

Video

What is the reason for such popularity?

Firstly, this is a kind of exclusive, handmade, and simply beautiful, fragrant product that can be used both for its intended purpose for hygienic purposes and as a gift.

Secondly, unlike store-bought, it is natural product, and therefore safe for. Looking at the label of a hygiene product, it is not difficult to understand what the manufacturer used in its production chemicals and various additives that sometimes have negative consequences to your health. The use of such a product may cause discomfort on the skin: itching, peeling,...

When making soap with your own hands, you select natural ingredients, therefore, such a cosmetic product is safe for health and can be used even for sensitive skin and allergies.

Handmade soap (see photo below) looks very beautiful and, in addition, has a pleasant, incomparable aroma:

“How to make soap with your own hands” is one of the most frequently asked questions regarding the production of natural cosmetics at home. On the one hand, you can buy this product, but it is quite expensive. In addition, in the process of making soap with your own hands, you can make it the way you want by choosing the shape and aroma.

Currently, many people are engaged in the art of soap making, for whom this work has become not only a good source of income, but also. This process is very exciting, because those who make natural soap with their own hands are given an excellent opportunity to independently select the components and show creativity and imagination.

Another advantage of this type of hobby is that now the person doing it will always have an original and the right gift for any occasion. Moreover, such a gift will undoubtedly appeal to both men and the fair sex.

How to make soap at home with your own hands: making kit

Well, now, let's move on to the main question of how to make soap at home with your own hands.

For traditional home soap making you will definitely need the following components:

• Soap base.
• Additives, fillers.
• Natural dyes.
• Tools for work.

The soap base can be different, depending on who you like. For example, it is not forbidden to use a base taken from ordinary cosmetic soap industrial production. It’s worth mentioning right away that such a base will have a specific, pungent odor that is difficult, and sometimes impossible, to overcome. When mixing it with other components, there is a risk of getting a bar with an unpleasant odor.

Baby soap is also suitable for preparing the base; although it also contains chemicals, it often has a calm, subtle aroma.

Perhaps the best option would be to purchase a soap base based on natural oils (coconut, palm, etc.) in the store.

When choosing additives, you should be guided not only by your own preferences, but also take into account how they can diversify your assortment homemade soap, as well as what results they will bring. In any case, you will need oils without a strong odor. Olive, peach, almond, avocado, jojoba, coconut and others are suitable.

To give a fragrant smell to the future bar, you cannot do without essential oils. Here you are allowed to give free rein to your imagination. Lemon, lavender, ylang-ylang, orange, bergamot and others oils are perfect as a flavoring agent.

Also, petals and flowers of various plants will not be superfluous as fillers.

If the task is to prepare a scrub soap, then coffee beans, sea salt, sugar, and crushed oatmeal will come in handy. These fillers will help remove dead skin cells, cleanse thoroughly, soften and smooth the skin, and make it soft.

To make soap for oily skin, you will need lemon zest, which has a drying effect.

One of essential components is glycerol, which has . In addition, this substance relieves irritation and dries out oily skin.

When preparing a cosmetic bar, you will need milk, cream or water in a small amount to dilute the soap mass.

A kit for making soap with your own hands can be very different, you just need to use your imagination.

To create an original, beautiful soap you will definitely need special accessories, these are:

• Kit various forms(silicone, plastic) - the shape and size of the block being made will depend on them;
• Two containers (pans or deep metal cups) for a water bath;
• Grater;
• Spoons – tea spoon, table spoon.

How to make beautiful decorative soap with your own hands: making colored soap

A colored cosmetic product looks much more attractive than a white or neutral shade, which is why natural dyes are used in its production. So, let's try to figure out how to make colored soap with your own hands.

Coloring pigments will help give the bar a tint:

To get pink, you should use beet juice. To obtain blue – chamomile essential oil. A yellow tint will come from saffron, a green tint from spirulina algae, a brown tint from chocolate, and a black tint from coffee.

Along with natural ones, artificial dyes are also widely used, which can be dry or liquid. Pigments and mother of pearls are used to color soap.

Dry dyes are more economical because, due to their concentration, it is enough to dissolve a small amount in water and then add a few drops to the soap.

Liquid ones are more convenient to use, since they do not need to be diluted, but can be immediately added to soap at the rate of 5 - 10 drops per 100 g of soap liquid (depending on what shade you want to get as a result: light or saturated).

Having bought several colors, you can mix them together, getting various interesting color combinations.

Wondering how to do beautiful soap with your own hands, it is worth paying attention to insoluble colored powders - pigments that give unusual combinations of shades. For 100 g of soap solution you will need 1/3 teaspoon of pigment. Before the pigment colors the soap mixture, it is dissolved in fatty oil, this allows you to obtain a uniform slurry, which will subsequently color the soap base.

Mother of pearl will be of interest to those who are wondering how to make decorative soap with their own hands, so that it is not just beautiful, but original and refined. This component helps turn an ordinary bar into a real masterpiece, making it elegant and impressive. It is better to use it in combination with dyes.

How to make soap with your own hands: a traditional recipe

There are many recipes on how to make soap with your own hands, below is the traditional, most used one.

If you use crushed soap, you must definitely melt it, but in no case on the stove, but in a water bath or in the microwave. The heating should not be excessive, just wait until it melts. It is best to use a thermometer for liquids in this case. The base should heat up to a maximum of 65 °C. When melting in a microwave oven, there is a risk that the base will overheat and boil, so if you choose this method, you need to check its condition every 20 seconds.

Once the base has acquired the required consistency, you can begin mixing it with essences. This could be perfume, essential oils, honey, vanilla, etc. Ready-made essences intended for soap making are also suitable. We must not forget that they have sharp, strong odors, so it is important not to overdo it, adding very little at a time.

Having dealt with flavorings, you can move on to dyes. But they should be added with caution, since it is very easy to overdo it. You need to add the dye gradually; if the color turns out to be pale, add a little more until the desired color appears.

When you need to make soap with moisturizing properties, you cannot do without natural vegetable oils: jojoba, coconut, almond, sea buckthorn, argan, peach. Wheat germ, mango, and grape seed oil also have an excellent moisturizing effect. Do not neglect liquid vitamins A and E.

How to make your own moisturizing soap and scrub

How to make scrub soap with your own hands is a very pressing question for those who have decided to create a rich assortment of cosmetic bars for various purposes.

Scrubs have an exfoliating and cleansing effect, ridding the skin of “unnecessary debris.”

To make them you will need salt (sea salt or fine table salt), or ground coffee, sugar, semolina or corn grits, chopped nuts, and ground oatmeal.

When preparing moisturizing soap, you should remember that by overusing vegetable oils, you can get a bar that is too soft and will not harden.

The finished soap mixture is poured into molds. To make the finished soap easier and faster to remove at the end of work, the molds should be lightly greased with any vegetable oil or Vaseline.

How to make a stamp for original soap with your own hands

Now the store sells forms with different reliefs, which will be useful for those who are planning to make unusual soap with a convex pattern. To give a special flavor and uniqueness to the bar, it is recommended to use special stamps.

You can buy them in the store, but it’s better to make them yourself, just to do this you need to learn how to make a stamp for soap with your own hands. For this, a regular flat eraser is suitable, on which, using a small knife and nail scissors It will be very easy to cut out any design you have in mind.

Prepare the original cosmetic product in this way:

• A white mass is applied into the recess of the mold without adding dye, after which the rest of the mold is filled, but only with the already colored mixture.

It happens that after adding the soap composition to the mold, bubbles appear on the surface. To avoid this, you need to spray the surface with vodka or alcohol using a spray bottle for this purpose.

After this, the soap mass is removed to dry for several days in a cool, dry place. After several days of drying, the soap can be easily removed from the molds and admire the beautiful, fragrant cosmetic product made by yourself.

If the mold has not been pre-lubricated, then it will be difficult to remove the bar. You will need to place the mold in the freezer for 5 minutes, then pour boiling water over it. The soap should immediately separate from the mold.

The solid bar is ready for use, but to prevent it from drying out, it is best to place it in plastic packaging. Then the soap will last for months without losing its original properties.

DIY soap recipes

Anyone can make soap on their own; all it takes is desire, effort and imagination.

But if your imagination fails you, and you have no experience at all in this matter, we offer interesting, proven recipes for making soap with your own hands:

Soap "Honey".

The base is made from 100 g of glycerin soap, finely grated. Glycerin in this recipe was not chosen by chance, because it gives the yellow tint inherent in honey.

The crushed particles must be dissolved in warm water, add a couple of tbsp. spoons of honey, 3 tbsp. spoons of olive oil or the same amount of glycerin.

Soap "Marble".

It is worth mentioning that the resulting block will externally resemble a marble stone, which is very beautiful and unusual.

For the soap base you will need 100 g of baby soap, which you need to grate, place in a water bath, add 150 ml of milk and 1 tbsp. a spoonful of honey.

The resulting mass must be stirred constantly to ensure it is uniform.

When the mass becomes liquid, remove it from the heat and divide into two equal parts. Add 1 tbsp to one part. spoon of sea buckthorn oil, 4 drops of orange oil, in another - 1 tbsp. a spoonful of olive oil and 3 - 4 cubes of chocolate, grated.

Cool the resulting mixtures and pour into the mold as follows: 1 layer – orange, 2 – chocolate, 3 – orange, 4 – chocolate. Then mix the mixture and leave to cool. The result will be “marbled” soap.

Soap "Chocolate-vanilla".

This soap has an attractive appearance and a sweet vanilla aroma.

To prevent the aroma from being interrupted by strong perfume odors, it is recommended to use 100 g of grated baby soap for the base.

Melt the crushed particles in a water bath, adding 4 - 5 drops of vanilla essential oil, 2 tbsp. spoons of almond or olive, 2 drops of ylang-ylang essential oil, 0.5 teaspoon of cocoa powder, 1 teaspoon of ground oatmeal, 0.5 teaspoon of ground coffee, liquid vitamin E (1 capsule), 1 tbsp. spoon of honey.

How to make two-color “Emerald” soap with your own hands

When used, this soap invigorates, lifts your mood and gives the skin a delightful aroma.

Soap manufacturers often wonder “how to make two-color soap with your own hands,” because such a cosmetic product is in good demand among customers.

In this case, there can be any number of interesting ideas.

Below is an original and at the same time simple recipe for making a two-color masterpiece:

Soap "Emerald".

The soap base is prepared from 100 g of baby soap, grated. Small chips are poured into a pan and poured hot water(1/3 cup) and melts in a water bath for 20 - 25 minutes.

At this time you need to prepare the remaining ingredients:

Pour a small amount of water into a small container, add 0.5 teaspoons of food natural dye green, add 5 drops of mint essential oil. In another cup, add 8 drops of olive oil and 5 drops of sea buckthorn.

Mixtures of oils should be poured into the finished molten soap base; the result will be a yellowish or creamy tint. Now we have two containers, one of which contains a cream-colored soap base, the second a greenish mixture with a mint aroma.

You need to pour the mixture from two containers at the same time into the prepared form. Thus, you will get a block of two parts: yellow and light green.

This product will delight you not only with its attractive appearance, but also with its excellent properties. Peppermint essential oil relieves inflammation and dries oily skin, and its aroma tones, restores lost energy, replenishes vitality, and fights fatigue. Olive oil It has anti-inflammatory and anti-inflammatory properties, and sea buckthorn is a good moisturizer.

In other words, “Emerald” soap will be an excellent cosmetic product that cares for the skin.

The following video will tell you more about how else you can make soap with your own hands:

How to make liquid soap with your own hands from inexpensive ingredients

Liquid soap is considered more convenient to use than solid soap. In addition, it can be used as a shower gel.

Store shelves are literally full of all kinds of brands of liquid soaps, but none of them can compare with what is prepared at home. Why? Everything is very simple: it is homemade and contains natural ingredients that make it safe and most effective.

To make a soap base, you can take any ordinary solid soap and grate it, but baby’s is best suited because it has no odor, which means it will not interrupt the aroma of the finished product.

Place the resulting shavings in a small container, pour 1 cup of boiling water, and beat with a blender. Add 1 tbsp to the finished homogeneous mixture. spoon of honey, 1 tbsp. a spoonful of glycerin, 5 - 7 drops of any essential oil, mix thoroughly. Leave the mixture to cool for 15 minutes. After this time, add 1/3 cup cold water, beat. DIY liquid soap is ready to use. Now you can pour it into the dispenser.

Additional components may vary, but it is always recommended to use baby soap and glycerin as a basis. The benefits of baby soap have already been discussed regarding glycerin - this ingredient is an excellent skin moisturizer.

How to make natural shampoo with your own hands

It's no secret that any, even the most expensive shampoo contains a large amount of chemicals, preservatives and dyes. That is why sometimes, as a result of using such shampoo, itching, irritation of the scalp, and other troubles appear. Shampoo made from natural ingredients is much healthier. But where can I get it? It turns out to get

How to make soap from scratch

The method of making soap from scratch is the most difficult. Here you must follow all the rules and have experience in making soap. The process of making soap from scratch is longer than soap-based soap. It takes up to 6 weeks to achieve a neutral pH balance.
To make soap from scratch you will need:
- alkali - caustic soda (NaOH);
— base oil (without strong odor);
- essential oils to add aroma and color;
— decorations (sparkles, flowers, loofahs and other plants);
- tools (measuring spoons, 2 saucepans for a stainless steel water bath, gloves and glasses for working with lye, a headscarf, an apron, a blender or mixer, a grater or knife for wax, a plastic stirring stick and soft molds for pouring soap) .

1. Prepare the oil base in a water bath, i.e. melt solid oils and wax.
2.The most dangerous thing about making soap from scratch is the lye.
To protect yourself from getting alkali on your skin, wear an apron and rubber gloves. Also lay an oilcloth on the table and remove all excess. Prepare dishes for preparing cosmetics; they must be clean.
Measure out the required amount of water and lye. Put glass jar in a bowl with cold water. Now stir and fall asleep quietly lye in water.
Attention! Under no circumstances should you do the opposite! Since when water and alkali are combined, strong discharge heat, so the can will become hot and may cause an explosion.
3. Now we move on to the mixing stage. It is necessary that the lye solution and oil are at the same temperature; use a thermometer or determine with your hand by touching the dishes. Pour the lye into the oil, whisking with a mixer until it reaches the consistency of sour cream.
4. Add the necessary essential oils and beat again. If the composition must contain clay or other components, add them at this stage.
5. Place the soap in the prepared molds. Wrap the molds in a towel or blanket. Leave to cool and harden for 3 days. Then we remove the towel and leave the soap for another month in a dark, cool place to reduce the acidity and achieve a neutral pH. Cut into pieces and use!

How to make soap from baby soap

To make baby soap, you will need:
— 2 pans for a water bath;
- baby soap and grater;
— cosmetic oil(warp);
- essential oils for scent and color;
- tools for making soap.

1. Grate baby soap into fine shavings.
2. Prepare a water bath. To do this, place a pan of water on the stove and heat it up. Place the soap shavings in another clean pan and add a glass of water. Melt the soap until smooth. To speed up the soap melting process, add honey or sugar.
3. Cool the liquid a little and add cosmetic oil, whisk.
4. Add essential oils and decorations.
5. Pour the soap into the molds.
6. Cool the soap in the refrigerator until it becomes solid. Remove from molds and cut into small pieces. The soap is ready and can be used.

How to make liquid soap

In order to make liquid soap use potassium hydroxide or soap residue, which is grated. To impart softening properties, you can add 5 ml of vodka and glycerin.
1. Melt the remaining soap in a water bath and add water.
2. Add essential oils and whisk.
3. To make liquid soap, add infusions or decoctions of herbs.
4. Pour liquid soap into the container. The soap is ready.

How to make soap based soap

Making soap based soap is easy. The soap turns out natural and will have the color and smell you need. Use it immediately after preparation.
To make soap you will need:
- soap base, sold in special stores (can be transparent and white in the form of a piece or shavings);
- essential oils;
— decorations for soap (plants, sparkles, dry fruits, peels, etc.);
- cutlery and dishes.

1. Melt the soap base in a water bath or in the microwave, without adding water.


2. Cool and add plants, decorations and essential oils, stir.


3. Pour the soap into molds and cool in the refrigerator.
4. Cut into pieces. The soap is ready.

To vary the clarity of soap, you need to use white powder in the form of titanium dioxide. If you add titanium dioxide, or purchase a special white base, the soap will be cream-colored. Various additives will give the soap color and aroma.

How to make bath balls

Bath balls soften the water and make your skin soft and pleasant. To make bath balls you will need:
- baking soda;
- citric acid;
- corn starch;
- essential oils;
- oil sprayer and sieve;
- round molds.

1. Sift baking soda and starch into a bowl and add citric acid, mix well.
2. Prepare essential oils and pour into a diffuser. While stirring, distribute the oils evenly.
3. The mixture is ready if it sticks together when squeezed with your fingers.
4. Decorate the mixture and fill the molds tightly.
5. Leave in the refrigerator for 5 hours and remove from the mold. Place in a cool, dark place to harden for a day. After this, you can use it by adding balls to the bath.

How to make a massage tile

The massage bar consists entirely of oils and melts in your hands. Used to moisturize and soften different parts of the body.
To make a massage tile:

1. Melt the solid oil base in a water bath.
2. Add softer base oils.
3. When everything is completely melted, remove from the bath and leave to cool for 5 minutes.
4. Add essential oils and stir.
5. Pour into molds and place in the refrigerator to cool until firm. Can be used immediately.

To make your own recipe:
— ;
— determine what your skin needs;
- select base and essential oils;
- make soap in any way;
— .

Beginners are recommended to start by making soap based on baby soap. In soap making, it is very important to maintain the weight ratio of the ingredients. The method of a whisper of this and a handful of that will not work. Carefully measure and weigh all ingredients. And remember to take precautions when working with lye. Do not overdo it with the addition of essential oils; oversaturation leads to bad consequences.
You can use the soap recipes at home presented on our website.

Recipes for making soap at home

White Lavender Soap - recipe from scratch

softening body soap | baking soda, lavender oil, olive oil | dry skin

Mix 130 g of caustic soda with 375 ml of purified water. Follow the instructions above. Be careful with lye. Leave the solution to cool. In the meantime, make a water bath for 1 liter of olive oil to heat the oil. Remove the oil from the bath, and, stirring, pour the oil into the lye solution. Stir until the spoon begins to leave a mark. Add 20 ml lavender oil. Olive oil takes a very long time to thicken; the process can take several hours. Pour the mixture into molds and wrap it with a towel. Leave to harden for 3 days. Remove from the mold and leave in a ventilated area for 4 weeks.

1 month | Ofigenka.ru | 2010-09-05

Rose bath balls

cleansing body soap | rose, citric acid, rose oil | normal skin

Make bath balls: strain 450 g baking soda and 145 g of corn starch and 300 g of citric acid through a sieve. Add rose essential oil (2.5 ml) and stir. Spray the mixture evenly with 5 ml of rose water until it clumps together. Divide the mixture into 2 halves. Add 5 g of red pepper to one part. Place tightly in molds and form into a ball. Leave it in the refrigerator overnight. Remove and leave to dry for several hours. You can decorate with dry rose buds.

1.5 days | Ofigenka.ru | 2010-09-05

Enrichment of baby soap

cleansing body soap | baby soap, fatty oil, essential oil | normal skin

Prepare 200 grams of baby soap, 100 grams of hot water, 2 tbsp. tablespoons of fatty oils (a mixture of oils), 1 teaspoon of glycerin and half a teaspoon of vitamin A and E in oil solutions, 5-10 drops of essential oils. First, grate a piece of baby soap and fill it with hot water (you can also use a decoction of herbs or milk). Place the soap in a water bath and wait until the mixture melts, stirring. If lumps form, add water. You should get a creamy mass. Heat (melt) the fatty base in a water bath. Combine the soap and fat phases, add essential oils and other ingredients, stir thoroughly. Pour the mixture into the molds and leave to cool. It will take a week to finish the soap. When the soap dries (the water evaporates), you can take the soap out and use it.

1 week | website | 2011-02-09

Oatmeal soap

cleansing body soap | oatmeal, baby soap, glycerin | normal skin

Baby soap (200 g) is used as a base, which must be grated and melted in a water bath. To get rid of the specific smell of baby soap, melt it 2-3 times. Add a fatty base (any fatty oil) and glycerin (1/2 teaspoon). Add vitamins A and E, essential oils (for example, orange) to the hot mixture, mix thoroughly. Prepare 1 teaspoon of milk powder or cocoa powder and 2-3 tbsp. tablespoons crushed oatmeal. Add these ingredients to the hot mixture and mix well. Place the mixture in square shape. For decoration you can sprinkle with whole oatmeal and press them lightly into the soap. Leave the soap to dry for 2-3 days, remove from the mold. Baby soap dries out and loses its shape, so you can simply trim the edges with a knife.

3 days | website | 2011-02-09

Soap with sea buckthorn oil

cleansing body soap | sea ​​buckthorn oil, orange oil, eucalyptus oil | normal skin

Melt 100 g of white soap base in a water bath, add a third of a teaspoon of sea buckthorn oil for color and 3 drops each of sweet orange and eucalyptus essential oils for scent. Take a mini mixer and beat the resulting mixture and pour into the molds. You can add calendula petals to soap. We advise you to prepare the leaves in advance, since pharmaceutical calendula is crushed into dust and contains many impurities.

2 days | website | 2011-02-11

Soap with hop cones and basil oil

pore-tightening body soap | hop cones, basil oil, soap base | oily skin

Melt 100g clear soap base, add 2 drops green liquid coloring and 4 drops basil essential oil. Place crushed hop cones in a soap mold and pour hot soap over it. The soap is ready.

2 days | website | 2011-02-11

Soap with coconut flakes

exfoliating body soap | mint oil, coconut | dry skin

Take 100 g of transparent soap base and melt in a water bath. Next, add 5 drops of Chinese mint essential oil and coconut flakes (half a teaspoon) to it. Stir well with a spoon until slightly thickened, but do not miss the moment when the soap can still pour into the mold. Make sure that the coconut flakes do not float and pour the soap into the base. Cooled soap can be used immediately. The coconut flakes will act as abrasives and improve exfoliation.

2 days | website | 2011-02-11

Strawberry poppy seed soap

exfoliating body soap | strawberry, poppy seed, soap base | normal skin

Make strawberry juice or use strawberry flavoring. Melt 100 g of transparent soap base in a water bath and add strawberry juice (1 teaspoon). Mix well by adding 1/4 teaspoon poppy seeds. Stir continuously until the soap thickens a little. Once the poppy seed is distributed throughout the soap, pour it into the mold. Poppy will improve skin exfoliation.

2 days | website | 2011-02-11

Soap with loofah

exfoliating body soap | loofah, sea buckthorn oil, orange oil | normal skin

For this soap, use a fresh loofah (with flat, soft and fine fibers), it will act as a gentle scrub. To make the loofah soft, place it in boiling water, squeeze it well, and place it in a mold for pouring soap. Melt 100 g of transparent soap base in a water bath and add 1/3 teaspoon of sea buckthorn oil and 5 drops of orange essential oil, 3 drops of lemongrass essential oil, beat the mixture well with a mixer. Fill the loofah liquid soap. And if the loofah floats, place a weight on top. Once the soap has cooled, remove it from the mold. Cut off the protruding part of the loofah.

3 days | website | 2011-02-11

White soap base soap with ylang-ylang oil

softening body soap | avocado oil, ylang-ylang oil, lemon oil | dry skin

For this soap, use 1 teaspoon of avocado oil, 3 drops of ylang-ylang essential oil and 5 drops of lemon essential oil. Melt white soap base for 1 soap 100 g in a water bath. For a yellowish color, you can add dye (1 drop of liquid). Add essential oils to the melted base and mix thoroughly. Prepare a relief mold and pour the mixture into it. After 20-40 minutes, when it has cooled down a little, massage the mold with your thumbs to get air into it. To avoid damaging the mold, gently press down on the raised part of the soap. If the soap does not come out, it is better to wait.

1 day | website | 2011-02-11

How to make bulk soap

softening body soap | soap base, peach kernel oil, basil oil | normal skin

To make volumetric soap, you will need special plastic molds that must be connected to obtain volume. Pour in the prepared soap and leave to cool. Since the soap will be in a closed form, it will harden more slowly. For voluminous soap, you can use the following ingredients: 150 g of white soap base, 3 drops of blue liquid dye, 1 teaspoon of peach seed oil, 3 drops each of basil, ginger, and grapefruit essential oils.

3 days | website | 2011-02-11

Soap with parsley

cleansing body soap | parsley, soap base, pine oil | normal skin

Prepare 1 teaspoon of dried parsley, crush it well and pour hot oil (for example, vegetable oil) over it. Within two days, the oil will be enriched with parsley components and it can be used to create soap. Melt 100 g of white and 100 g of transparent soap base separately. Heat the oil a little in a water bath so that the temperature of the soap base and oil are the same. Add 0.5 teaspoon of butter with parsley to each melted base. Add 4 drops of pine essential oil to the transparent base, and rosemary to the white base. Pour into separate identical molds and leave to cool. Next, you can combine 2-4 soaps, alternating colors. Tie with natural fiber, the gift is ready.

2 days | website | 2011-02-11

Soap with blue clay

cleansing body soap | blue clay, jojoba oil, patchouli oil | normal skin

To make homemade soap with blue clay, you will need 100 g of white soap base, a teaspoon of dry blue clay. The oil base will consist of 1 teaspoon of jojoba oil, 7 drops of patchouli essential oil. You need to melt the soap and add clay, oil and mix thoroughly with a mini mixer. To get soap without lumps, pour immediately after thorough mixing, the liquid should be hot. To get shaped soap, the prepared base must be sufficiently fluid. Pour the soap a little and press it with a spoon so that it gets into the relief. Pour in the remaining mixture to the end and wait 20 minutes - the soap is ready. Blue clay cleanses the pores and skin of the face and body.

2 days | website | 2011-02-11

Soap with honey

cleansing body soap | honey, propolis tincture, shea butter | normal skin

Melt 100 grams of soap base (in a water bath or in the microwave at 400 W for 2-3 minutes). Adding honey to soap is very simple - you just need it
mix there. The base should be hot enough
so that the honey has time to dissolve. But not too much - then
will be preserved as much as possible useful substances. Heat 1 tbsp. a spoonful of honey in a water bath so that it reaches the same temperature as the soap base. Add 1/3 teaspoon shea butter and 1 teaspoon alcohol tincture of propolis (for more details on how to make the tincture, see the website). Mix everything well and pour into the mold. Spray with rubbing alcohol to remove bubbles. Cool and wait until the soap hardens. Soap with honey turns out softer, more flexible, and
of course, beautiful.

Chocolate scrub soap with coconut flakes

cleansing body soap | chocolate, cocoa, coconut oil | normal skin

Melt 100 grams of soap base (in a water bath or in the microwave at 400 W for 2-3 minutes). Add 1-2 grams of dark chocolate, cocoa powder 1/3 teaspoon, vanilla sugar 1/3 teaspoon. To give a scrub effect, add coconut oil(1/3 teaspoon) and coconut flakes (1 teaspoon). Mix thoroughly, pour into the mold and leave to cool.

1 hour | mama-mila.ru | 2011-08-22

Chocolate coffee soap

cleansing body soap | chocolate, coffee, jojoba oil | normal skin

Melt 100 grams of soap base (in a water bath or in the microwave at 400 W for 2-3 minutes). Add 2 grams of dark chocolate and ground or instant coffee 1 teaspoon, vanilla sugar 1/3 teaspoon and 1 teaspoon of milk powder. Add 1/3 teaspoon of jojoba oil to the soap base. All components will dissolve well in a hot soap base. Place carefully and leave to cool.

1 hour | mama-mila.ru | 2011-08-22

Chocolate soap with shea butter

cleansing body soap | chocolate, cocoa, shea butter | normal skin

For 100 grams of soap base, use 2 grams of dark chocolate, which will dissolve itself in the base. To enhance the effect, add 1/3 teaspoon of cocoa powder, vanilla sugar and shea butter. Using a special mold, you can get beautiful soap.

1 hour | mama-mila.ru | 2011-08-22

Soap ice cream

cleansing body soap | sugar, condensed milk, wheat germ oil | normal skin

Take 1 tablespoon of creamy soap base and add it to 100 grams of hot white soap base. Mix and add 1 teaspoon of condensed milk, 1/3 teaspoon of vanilla sugar, 1/3 teaspoon of wheat germ oil. Dissolve a little crystalline menthol (1 gram) and add it, it will give a feeling of coldness in tender places. Mix well and pour into the mold. Spray with alcohol to remove bubbles. The more creamy the soap base is, the softer the final soap will be. If you use a clear soap base, the soap will become cloudy.

1 hour | mama-mila.ru | 2011-08-22

Oatmeal soap

cleansing body soap | oatmeal, powdered milk, avocado oil | normal skin

Add 1 tbsp to 100 grams of melted soap base. a spoonful of ground oat flakes and some whole ones for decoration. Add 5 drops avocado oil and 1 teaspoon milk powder. Stir well and pour into the mold.

1 hour | mama-mila.ru | 2011-08-22

Cinnamon Soap

cleansing body soap | cinnamon, butter walnut, cinnamon oil | normal skin

Add ground cinnamon, cinnamon essential oil and walnut oil (1/3 teaspoon each) to the soap base (per 100 grams).

1 hour | mama-mila.ru | 2011-08-22

Soap with mint

cleansing body soap | mint, mint oil, grape seed oil | normal skin

For 100 grams of soap base, take ground mint (1/3 teaspoon), mint essential oil 9 drops, grape seed oil 1/3 teaspoon and alcohol tincture chlorophyllipt 1/2 teaspoon.

1 hour | mama-mila.ru | 2011-08-22

Spiced soap

cleansing body soap | turmeric, cinnamon, clove oil | normal skin

Prepare 100 grams of soap base. Add 1/3 teaspoon ground turmeric, 1/6 teaspoon ground cinnamon, 4 drops clove essential oil.

1 hour | mama-mila.ru | 2011-08-22

Soap with lime and mint.

cleansing body soap | lime, mint oil, lime thought | normal skin

Dry the zest of half a lime well. Take 100 grams of clear soap base and melt in the microwave. It should be hot enough for the zest to give its color to the soap. Add dry zest and stir well. Then add 5 drops of lime essential oil and 3 drops of mint essential oil, 1/3 teaspoon of grape seed oil. Continue stirring until the soap thickens a little so that the particles stop floating. You can also add lime juice, but first strain it through a fine strainer. The aroma of lime essential oil does not last long, so you can add stronger and more persistent lemongrass essential oil. After 20 minutes, the soap is ready, but before using for the first time, you should let it dry for another day.

5 hours | mama-mila.ru | 2011-08-24

Orange zest soap

cleansing body soap | orange, orange oil, grape seed thought | normal skin

Dry the zest of half an orange well and chop it finely. Take 100 grams of clear soap base and melt in the microwave. It should be hot enough for the zest to give its color to the soap. Add 10 drops of orange essential oil and 1/3 teaspoon of grape seed oil. To enhance the scent, add 1-2 drops of Lemongrass essential oil. Stir well until slightly solidified to avoid pieces of zest floating to the surface. Leave to cool and dry for another 4-5 hours.

Soap making is one of the most popular hobbies in recent years. Many modern housewives are wondering how to make soap at home, and today they will be given a very detailed answer. Of course, you can buy a ready-made soap-making kit, but it’s more interesting to do everything yourself.

How to make soap at home

Making soap at home will help you get not only a beautiful piece of soap, but also a useful one, because if you wish, you can add components to it that have a positive effect on your skin. But first things first.

Soap making for beginners is a very simple but very exciting process. The main thing is to approach the task correctly. Initially, you need to master the technique and only then move on to making bars with multi-layer color schemes.

Ingredients needed for soap making for beginners:

• Mold

At first, you don’t have to buy special molds for making soap at home. Quite suitable silicone molds for baking or any other, from which it will then be easy to remove the finished block.

In online stores you can find a fairly large assortment of molds: from the most primitive to entire compositions.

Pour the prepared soap composition into the mold and leave it in a cool place to harden for at least 24 hours. Then the soap is removed by lightly pressing the bottom of the mold, turning it over. If this does not help, put the mold in the freezer for a few minutes and then under hot water. After this manipulation, the soap is removed quickly and easily.

• Base for soap making

Buying soap base is not a problem. But for your first experience, it is better to use simple baby soap without additives. Before painting it and pouring it into the mold, you need to thoroughly melt the base soap in a water bath.

Next time you can switch to a special soap base. There are three types: creamy, white and transparent. It’s better to start with a transparent base, and then try to mix them together.

The shelf life of the base is 1.5 years, so it is very important to check the date of its manufacture. The base should be stored in a dark place.

The base is cut into small pieces and melted in a water bath, the temperature of which reaches 80 degrees. Constantly stir the composition.

You can also heat the base in the microwave; if it overheats and bubbles, carefully spray it with alcohol from a spray bottle.

• Soap dye

Any food and cosmetic dyes are suitable for making soap at home. Before adding them to soap, the dye must be diluted in minimum quantity water.

Dyes, glitters, sequins, rhinestones, dried flowers and other decorative elements are added to the soap last.

• Essential and base oils

The last step is to introduce additional components into the colored soap. You need to choose a base oil for your soap. You must choose the oil very carefully, since it is it that will determine what properties the soap will have.

Jojoba and apricot oils bones ideal for any skin type. They moisturize and nourish it, enriching it with vitamins. The first of them also has an antibacterial effect.

Avocado oil nourishes the skin, toning it. It heals small wounds and microcracks well.

Macadamia and shea butter start the process of skin regeneration, renewing cells. These oils are good for dry skin that is prone to early aging. Avocado oil has similar properties.

The easiest one is grape seed oil. Regulates fat balance and is most suitable for oily skin types.

For 100 grams of base, a third of a teaspoon of oil is enough. Do not neglect the rule, otherwise the soap will not harden and foam well. Additional oils should also be added according to the norm: 6 drops are enough for a good aroma.

You need to add oil to a slightly cooled base, but before it begins to harden. Mix all components thoroughly with a plastic spatula and pour into the mold.

Soap making kits

A large number of soap making kits are sold in online stores. They provide everything you need, as well as instructions that must be strictly followed to get a high-quality result.

You can also order a soap making kit for children. This is a very exciting activity for them, but everything must be done under the supervision of adults.