Flowers are the decoration of the garden. Lately Climbing plants such as roses or clematis became popular. Having planted them, gardeners begin to think about support for them. Now we’ll tell you how to make them yourself and show you a few ideas.
Anything can serve as a support for clematis. It all depends on where the plant is planted. At windows it can become an impromptu frame. Wrapping around the supports, following the shape of the window, it will decorate the facade of the house. In addition, it will create shade, and during flowering, a wonderful view of greenery and bright colors– stars.
This flower will perfectly decorate the porch of a house or veranda. Moreover, architectural elements will become the supports. On the veranda entwined with clematis you can comfortably receive guests or enjoy reading a book.
Another interesting option This is planting clematis near a garden bench. The plant will curl around the frame and create shade. This is also an excellent option for decorating a personal plot.
In addition, weaving flowers can be used to disguise a blank wall or fence. This way you will decorate your area with flowers and hide an ugly place.
And of course, a classic of the genre, clematis on a garden arch. This option is suitable for owners of large plots where it is necessary to visually separate the vegetable garden from the lawn. As you pass through the arch with flowers, you will find yourself in another part of your yard. These are the options you can choose from.
Ideas for supporting clematis
When a person is looking for ideas for supporting flowers, the most unexpected materials can be used. For example, you still have after renovation wooden slats they can be put to good use. We fill the walls of the gazebo with them. We let the plant go over them.
You can also use waste materials for support. If you have a piece metal mesh it can serve as a support. We roll the mesh into a cylinder and install it on the flowerbed. Afterwards, it is enough to plant clematis, which will curl as they grow.
You can make a sculpture of them using metal rods or wire. The openwork frame will also become a beautiful support for clematis. Or you can stretch a net on the wall of the house and let a flower curl over it. This way you will get beautiful decor walls of the house.
How to make a support for clematis with your own hands, step by step master class
Gardeners do not have to buy ready-made support structures, because they can be made with their own hands. The first step is to decide what shape the structure will be made. Let's choose a pergola, despite the name it is a very simple wooden support. This is an environmentally friendly material suitable for any landscape. All work is carried out according to the following rules:
- Wooden beams must be treated with antiseptics and compounds that protect the material from precipitation.
- To fasten the support parts, it is better to use bolts and wood screws, this will ensure the reliability of the structure.
- The grille can be attached with staples or screws.
Assembly and installation is as follows:
- marking the area, driving pegs into the corners of the future pergola;
- corners are recessed by at least 90 cm;
- pour crushed stone in a layer of 10 cm at the bottom of each excavation;
- sawing off the racks the right size and put it in the recesses;
- we check with a level whether the racks are installed level and fill them with cement mortar;
- after the cement has risen, we fasten the transverse beams;
- All that remains is to make a sheathing from the slats.
The pergola is ready. Now she needs to stand for a couple of days and plant clematis.
Video: DIY clematis support
The above describes how to make a support for weaving flowers yourself. Now we bring to your attention a video, after watching which you can build supports for clematis on your site.
Supports for climbing roses
For times, you can use all kinds of supports. The main condition is that their height should be from 1.8 m.
Ideal for climbing roses:
- Arches.
- Flat supports.
- Screens.
- Pergolas.
- Supports in the form of silhouettes.
Beautiful supports for roses
Every gardener wants to decorate his plot with flowers and ornamental plants. Roses are very popular different varieties. The climbing variety of this plant looks very beautiful. So that it does not take up much space, you need to take care of the support in advance. And of course, the support should be beautiful. We list five beautiful supports for roses:
Obelisk.
Umbrella support.
Pergola.
Garden sculpture.
Forged screens.
How to make a support for climbing roses with your own hands, step by step with photos
Supports for climbing roses must meet the following requirements:
- reliability so as not to break under the weaving branches of roses;
- aesthetics, the support must be carefully made and fit into the overall plan of the site;
- match a specific variety of roses; a large arch will be inappropriate for a small plant with small flowers;
- compactness, necessary for small areas where every meter is profitable.
The most the best option will self-production. Since we need a durable structure, it is best to use metal as a manufacturing material.
You can take four rods of reinforcement and secure them in the ground. Then we tie it with simple wire in a circle in increments of 40 cm. For a more beautiful look, we paint the resulting structure in white. This will prevent the support from overheating. Once everything is dry, you can plant the rose. As the plant grows, it is necessary to lay it along the crossbars. This way the support will be evenly entwined with the rose.
Ideas for supports for climbing roses
Having planted a climbing rose, you need to think about support, otherwise all the beauty of the plant will be hidden. The choice depends on the landing site. If the rose is planted next to a building, it is enough to secure a plastic mesh to the building. It is along it that the rose will climb up.
Many gardeners fence off part of the plot with beds from the rest of the area intended for recreation. If there is such a fence on your site, it will serve as a support for the rose. It must first be painted white. After the paint has dried, we plant the plants. After a while you will have hedge with the scent of roses.
Another great idea, a rose gazebo. It is feasible if you have a welding machine and the ability to work with it. It is necessary to assemble a frame from durable metal rods or pipes in the shape of an arch. We deepen the base of the structure well and plant climbing roses. When the plant completely covers the arch, you can place a bench or table under it.
Support for cucumbers
It is best to grow cucumbers in a vertical position. This allows you to quickly and efficiently harvest, and also eliminates discomfort on the skin. Various hangers can help with this. They can be made of wood. For example, from timber and slats you can build a support - a pyramid. It won't take up much space.
You can also install poles on both sides of the bed and stretch a mesh between them.
Or do it differently, we put up a pole and plant it around it and tie twine to it. After this, we secure each rope to the ground with small pegs. The distance from the post to the rope is 60 cm. After this, we plant cucumbers. As they grow, they will trail along the twine.
DIY supports for cucumbers in open ground
You can make a variety of supports for cucumbers with your own hands. If after repair you still have plastic pipes and you don’t know where to put them, then we’ll tell you now. We allocate a place where it is planned to plant cucumbers. After this, we fix two pipes about 2 m high in the ground at a distance of 1.5 - 2 m from each other. On top of them we place another pipe with a length slightly greater than the distance between the pipes. On the sides of each of the vertical pipes we install more supports 1 m high. After this, we connect the side posts with an improvised ridge and install horizontal crossbars. Now you can plant cucumbers both in the ground and in containers installed on stands.
The easiest option is to install poles or reinforcement in the garden bed along which the cucumbers will climb as they grow.
A chain-link mesh can serve as an excellent support. Having secured it to the frame, we install it in the shape of a triangle on the garden bed. The plant will weave along it. This will also save space on the site.
Supports for cucumbers in a greenhouse
When planting cucumbers in a greenhouse, there are not many options for support. If the shape of the greenhouse is round or house-shaped, then a frame of slats can be made along the walls. Having planted cucumbers, they will trail along them, and the fruits will hang down. This will keep the greenhouse clear of clutter and make harvesting much easier.
In large greenhouses you can tie up plants. A rope is stretched from the ceiling to the ground and secured. As the plant grows, it attaches itself to it with tendrils and stretches upward. As the cucumbers grow, they should be directed to corn. Once hooked, they will wrap around the stem of the plant. Moreover, such proximity has a beneficial effect on both crops in the form of increased yield. For cucumbers, corn serves as protection from wind and cold, which helps extend the life and fruiting of the vegetable crop. The arch from the gate of the site can also serve as a support. When the grapes grow, you will enter your house along a green corridor decorated with bunches of grapes.
Grape support diagram
The scheme greatly simplifies the work of constructing the support. You immediately see the dimensions and can calculate the amount of materials. The diagram below shows the dimensions, namely the height is 2.2 m and the distance between the pillars at the ground is 87 cm. It increases upward. The grape seeding is also shown. Looking at the diagram, you can clearly imagine how the entire structure will look on the site.
How to make a grape support with your own hands step by step, master class
The simplest and most convenient type of support for grapes is a trellis. Doesn't take up much space and is easy to install. Now we’ll tell you how to make it on your site.
For this we need:
- 4 wooden posts 2.5 m long;
- 30 m aluminum wire;
- crushed stone;
- cement;
- tape measure and chalk.
Now let's get to work:
- on the site we measure a rectangle 80 cm wide and 3 m long;
- at the corners we dig holes 30 cm wide and 50 cm deep;
- in each hole we install two pillars in the shape of the letter V, with a distance of about 80 cm at the bottom and 1.2 m at the top;
- We fill each hole with crushed stone to half the depth, and then cement it;
- when the cement rises, you need to tighten the wire, the first row is pulled at a distance of 50 cm from the ground, between other rows it is enough to make gaps of 40 cm.
By repeating this algorithm of actions you will make a support for your grapes.
This article describes the types of supports for both weaving flowers and vegetable crops and grapes. Using the information provided, you will select a suitable support or you can make it yourself from scrap materials. Good luck.
Climbing roses are one of the most beautiful, graceful varieties in the world of flowers. They can decorate any place. The dacha is no exception. Landscape designers often use the bush variety to decorate gardens and parks. Just look at the arches created from these graceful plants. And hedges of climbing roses! The variety of color variations is surprising, the right combination of which can transform a space. This article will talk in more detail about how to tie climbing roses.
General rules for caring for climbing (climbing) roses
In order for climbing roses to become a decoration of the space, it is necessary to provide them with decent care. If treated with care and attention, these “royal flowers” will delight you year after year. In addition, they have a magnificent, subtle, elegant aroma that contributes to the overall enchanting atmosphere. Having seen climbing roses bloom just once, you will want to plant such flowers in your garden.
How to tie a climbing rose
Three components are extremely important for this variety:
- Feeding;
- Watering;
- Trimming.
Top dressing
There are plants that can easily do without fertilizer. Roses of this variety do not belong to this category. They love to be fertilized. Literally before our eyes they transform from “ proper feeding" First of all, you need to feed roses after pruning. spring period. The most the best fertilizer in this case there will be rotted manure and ammonium nitrate. In size: 3 kg of manure per bush and 25-30 grams per 1 m2.
After 14 days, it is worth carrying out the feeding process with other means: mullein - 3 liters, potassium salt, ammonium nitrate 10 grams, superphosphate - 40 grams. The soil is fertilized with this mixture. When the roses begin to bloom for the second time, add ash in the amount of up to 100 grams per bush, superphosphate - 40 grams, potassium salt 15 grams.
Watering climbing roses
On average, flowers are watered once a week. Here it is also worth taking into account factors such as weather conditions. There is a nuance in watering technology: you need to water slowly, slowly, right to the roots. This watering will prevent the possibility of shallow roots forming. The most favorable time for watering - early morning.
When watering a climbing rose, you must observe moderation. Closer to autumn, watering should be reduced. Overmoistening of the soil can lead to plant diseases. In October, no watering procedure is required. Winter is easy to bear.
Pruning climbing roses
Pruning is simply necessary for this variety of roses. To form a crown, obtain a lush and abundant flowering and maintaining the culture in a healthy state.
Rose pruning
Pruning should be done carefully so as not to damage either the plant or yourself. You need to use a well-sharpened tool.
In some cases, pruning has its own characteristics. General basic rules for pruning:
- Using a sharpened cutter;
- The cut is made at an angle and at a distance of 5 cm from the bud;
- The cuts are made very carefully;
- Dry, frozen stems need to be removed in a timely manner;
- Shoots that have not developed should also be removed.
Why do you make supports for a climbing rose?
The question may arise: “Why does a climbing rose need support?” The fact is that climbing roses do not have any hooks on the stems so that they can curl around them on their own. They need to be fixed on supports, setting a certain direction, fixing them on supports. Mounting climbing roses solves problems such as:
- Creation beautiful shape bush;
- Abundant flowering throughout the entire height;
- By making the crown sparser, a favorable climate inside the crown is ensured;
- Healthy stems and foliage give even more beautiful view climbing roses.
How to tie roses to a support
Rose support
It is best to give the shoots the desired shape in advance to avoid additional worries. You need to immediately install a support when planting a seedling. This will eliminate the possibility of damage to the developing root system of the plant.
Pay attention! You can give any direction to the stems, trying to get the maximum decorative effect.
There are several options for how to secure a climbing rose:
- Horizontal garter - on a lattice or trellis;
- Spiral - tying a pole or other vertical support;
- Vertical - along tree trunks, arch columns;
- Fan-shaped - next to a wall or hedge.
“In spring, climbing roses definitely need time to set buds on horizontal shoots. There is no point in rushing to lift it from the support. You need to wait some time for the buds to appear up to 3-5 cm on second-order shoots. Once I tried it without waiting for the young shoots to grow and decided to attach them to a support. As a result, the entire pipe was practically bare: there was no flowering. Once again I was convinced that I need to wait until the buds swell.
When placing climbing roses on a support, it is necessary to take into account that the planting of pink shoots occurs at an angle of 30 degrees. In accordance with this, they are placed on supports.
In the case of a horizontal arrangement, the growth of lateral branches will increase, which are absolutely unnecessary in this case.
Additional information! When the branches are directed at an angle, in a spiral shape, this promotes better formation of buds. Flowering lasts a long time.
When climbing roses are arranged vertically, it will be necessary to artificially create branching, because the flower will grow in length. Here it will be necessary to bend the top of the plant down to change direction.
A rose bush can be shaped like a fan, which will become a screen, partition, or act as a decoration for walls or fences.
Climbing rose on the partition
DIY rose arch: detailed guide, diagram
Note! The arched option is very suitable for garden design. The arch itself fills the space with a certain mystery and elegance. When there are climbing roses on it, it is an unforgettable view.
Most often, arches for climbing roses are placed near the entrance to the yard. This is not the only place where she will “fit in.” An excellent location would be next to the gazebo. Arches are usually made of wood or metal. Plastic version also takes place. The strength of this material leaves much to be desired. The most durable are forged arches. They are mainly used as a support for climbing roses.
In order to make a support with your own hands, you need to decide on its purpose. You can pre-create a drawing. Will it serve only as a decoration in the flowerbed or will it be an entrance, a place to relax. The purpose is taken into account when choosing the material and thickness of the bases and transverse slats. Below are recommendations on how to make a climbing rose arch with your own hands.
Algorithm for creating an arch with your own hands
Which arch to choose?
Each material has its own advantages. So, a tree looks great combined with green leaves and flowers. Thick stems are usually attached.
Pay attention! For metal arches, graceful thin stems of roses with small flowers are better suited.
Is it better to make a rose arch yourself or buy a ready-made one?
It depends on the size of the arch, the availability of construction skills, the amount of free time and financial capabilities.
If making such an elegant garden accessory brings pleasure and inspiration, then you can safely create it yourself.
An arch with climbing roses entwined around it will become a unique garden decoration. It's worth the effort and time.
Every gardener needs to know how to tie up a climbing rose so that it pleases with its flowering and the thin stems do not break from improper support.
Today you can find a lot for the garden and cottage interesting jewelry, but nothing beats fresh flowers. This is why summer residents begin spring work from arranging flower beds and landscaping the territory. If you are planning to plant flowers, we suggest you find out how to make supports for climbing roses and other plants. Even from scrap materials you can make original supports that will succinctly fit into the design of the site.
Types of supports for climbing flowers and plants in the country
Supports for climbing roses can be made from the most different materials, it all depends on the available budget. Climbing flowers look beautiful in arches, as well as on straight supports and ladders. Quite often, summer residents use a trellis net that fits perfectly into almost any landscape design. This material is considered one of the most budget-friendly, yet it is easy to use, quite lightweight and suitable not only for roses, but also for other plants.
You can make a trellis net yourself. To do this, you need to choose a suitable place, then dig in metal or wooden poles at a certain distance, and then stretch the mesh. To ensure that the structure fits into the design of the site, paint the pillars suitable color. The trellis can also be made entirely from wooden planks, nailing them with a net between the beams. Using a trellis, you can form a climbing rose bush with your own hands.
– perfect solution for owners of spacious summer cottages. You can also make such supports with your own hands. Pergolas by appearance They are a lattice roof fixed on poles. The length and width of such a support depends on your design idea. Pillars can be made not only from wood, but also from metal. The advantage of a pergola for climbing roses is that it can perform the additional function of a gazebo.
Arches for climbing roses are smaller and have curved shapes. They can be installed at the entrance to the garden or to decorate the surrounding area. Forged or wooden arches are often made as supports for flowers.
Wood or metal poles can also be used as a DIY support. In this case, it is necessary to dig the post deeply into the ground so that it serves as a strong support for the roses.
You can use a fence, stones or other materials as a support for roses, it all depends on your design idea. Knowing how to do supports for climbing roses and other plants, you can decorate your site and give it a touch of uniqueness.
Among all the variety of related plants, climbing roses occupy a special place due to the abundance of flowers and the possibility of incredible arrangement. The most bizarre forms of these amazing flowers create supports for climbing roses. Since they themselves do not climb, it is the support for roses, along which they are guided and on which the shoots are secured, that is crucial for the design of a flower bed, garden or park. Summer residents usually design their plot in such a way that all the structures can be made themselves; a do-it-yourself support for a climbing rose is no exception.
Using climbing roses, summer residents often want to create a shady resting place, decorate the entrance to a plot or alley, if space allows, they decorate fences and disguise unsightly buildings. Using vertical supports to make a rose central figure flower garden or even the entire garden.
But when choosing a place for such a structure, you need to remember that a rose is a delicate plant with its own needs and preferences. Therefore, it needs to be planted where it can be provided sufficient quantity light, where water flowing from the entire area will not accumulate, where groundwater does not come close to the surface. Otherwise, if you plant a rose in a place that is not suitable for it, then you will not have to enjoy the wonderful flowering, but will have to treat it for many diseases, admiring only the prepared support, not entwined with lush branches.
Climbing roses are divided into scrubs and ramblers, which are very different from each other. Thus, most varieties of scrubs have powerful, thick, almost rigid shoots, growing up to 2 meters or more. They are different amazing aroma and large flowers. And flower growers, among other advantages, especially note the small number of thorns. At first glance, their bushes do not require support for growth, but they need it, because heavy flowering branches can break under their own weight and the action of the wind. Support will not only support the shoots, it will help them look really great.
Ramblers without support will not grow well and will not look the way they deserve at all. Their thin flexible branches grow up to 4.5 meters, they are covered with small, abundant flowers, which look very decorative on supports of fancy or very simple shapes. 
In addition to being convenient for the rose itself, the place should allow the support to be secured so that it can withstand not only the weight of the rose, but also be able to withstand strong gusts of wind. If roses are supposed to be placed along the wall, then the support should be at a distance of 25 cm from it; a shorter distance will not ensure air circulation.
Video “How to make your own supports”
From the video you will learn how to make supports yourself and easily.
Types of supports
The shapes of the supports are very diverse, but they are based on several basic varieties that designers play with depending on the desired result. The main ones are an arch or a pergola; trellises, which can take the form of a vertical wall, a pyramid, a ladder or simply a lattice; pillars or monuments. 
When constructing a support, you need to remember that climbing roses do not climb themselves and do not cling to the support; they must be consistently directed in the right direction and fixed on the support. In addition, there is a very important secret of flowering - flowers are formed not on the main shoots, but on short, usually, branches that extend from them at a right (or almost) angle, and these young branches always grow upward. Therefore, the main shoots should be located horizontally or at least at an angle of 45 degrees to the ground line. You need to remember this when braiding the support. You cannot direct the shoots vertically upward, otherwise the flowers will appear somewhere high, there will be few of them, and flowering from June to September will not work. And, of course, the bush needs to be freed from faded roses, which stimulates the formation of new buds.
You need to build a support before planting the plant, so as not to damage the roots of the rose already growing in this place.
Arch
Arches are built at the entrance to a site, gazebo, house or some area of the park. A DIY rose arch is usually made of wood or metal. The tree always looks great among flowers; it is used to support massive stems, and metal structures often twined with thin, tender shoots. Wooden arches coated with varnish or paint can last more than 10 years, and metal arches for at least 15 years. 
The support pillars must be firmly fixed in the ground; in some cases, they even make a concrete base. For the arch, a vault is made, and for the pergola, a lattice (most often wooden) is installed according to the type of roof. The pillars must be at least 1.80 m high; wooden blocks or metal rods are installed around them in a circle at equal distances, and they are secured to the base and top beam. The growing shoots of roses will be guided along them; they will curl onto the pole in a spiral, positioned almost horizontally. Two shoots can be braided towards each other, they will be covered with young branches with flowers.
For a pergola, you can use a removable net made of ropes or a lattice made of wooden slats. This design will make it easier to cover the bush for the winter; its main part will simply be removed along with the lattice or net.
Trellis
The trellis is placed against the wall or in the middle of the garden, separating different zones. It can be simply a rectangular structure consisting of a strong frame, usually wooden, and a lattice located (fixed) inside this frame. Summer residents usually use metal wire or wooden slats for trellises, which look great among the green roses if painted with white paint. Plastic gratings are less commonly used. The trellises are arranged in the form of a fan or given a fancy shape that the rose bush, hiding a trellis underneath. 
You can simply dig vertical posts of the required height into the ground, usually from one and a half meters and above. Holes are made in them along the entire height at intervals of 20–50 cm from each other, and nails curved with hooks are inserted using pliers. The wire is pulled onto these resulting hooks - and that’s it! simple frame. It must be disinfected and painted.
It is not necessary to place roses on one side of the trellis; you can thread shoots through the lattice, then you will get a flowering wall on both sides. This is not very convenient for caring for covering roses - in the fall it will be difficult to untangle them in order to fold them and cover them for the winter, and if the roses do not need such insulation, then a double-sided flowering trellis will look very impressive.
A chain-link net pierced with shoots of climbing roses may serve as an example of a simple trellis, but it can also be a magnificent hedge, completely hidden under the leaves and flowers of a lush plant.
Pillar
A pillar as a support for roses can be of any height, placed in the middle of a flower garden, thus positioning it in two planes, or it can stand near a bench or gazebo, pleasing the eyes of vacationing owners and arousing the envy of their guests. In parks, they make a wonderful composition by placing pillars at equal distances from each other along an alley or path, connecting them with a beautifully slack rope or chain. Roses twining around the pillars hang picturesquely from these chains in blooming garlands. 
The pole can be made of any material; in dachas it is usually wood, but in parks it can be anything - wood, metal, stone. But around this central support there should be metal or wooden horizontal circular fragments on which the shoots weaving along them will be fixed, so that the branches rise up in a spiral, and then also fall down, if the length of the shoots allows.
This principle is used to build not just pillars, but pyramids or other elongated structures, usually called monuments.
Supports, whatever their shape, are designed not only to support climbing roses, but also to help them look in all their amazing beauty, decorating the garden.
Video “Different types of supports”
From the video you will learn about common types of supports.
