Vertical decorative border for wallpaper. How to glue wallpaper with a border quickly and correctly? Types and selection of decorative elements

Not very wide strips for decorating wallpaper are called borders. They often serve as a border for combining different types of wallpaper on one wall, in particular in a horizontal way. The border in this situation looks natural and laconic.

Borders are most often glued to the upper segment of the wall. This does not mean that only this option is acceptable, but this can be called a typical case. Although, it would not be amiss to consider the option of having a border around the perimeter of the ceiling, or, which is also interesting, in the lower third of the wall.

Features of the location of the curb:

At the top of the wall it plays the role of a decorative edging, which definitely makes the room more comfortable.
Along the perimeter of the ceiling the border serves as a separator, zoner.
Bordering a wall near the floor - a way to hide the unsuccessful gluing of the walls when you made a slight mistake with the height of the wallpaper.

But also vertical use curbs are not uncommon. For example, if you need to visually divide a wall into two zones, this option is often chosen in the nursery. The border borders doors, mirrors, etc., in short, what you want to highlight.

Paper borders for wallpaper in the nursery: specific application

Paper border is often used in the nursery. And this is a smart move.

The border will help in this case:

Divide the room into a zone (work, play, neutral);
Visually change the space, visually enlarge or expand it;

A clear mistake would be gluing a border in the middle of the wall. Not only does it not look very impressive, it cuts off a considerable part of the wall, visually, of course. But it is not forbidden to glue the border vertically in the middle of the wall.

How to glue a border to wallpaper: step-by-step instructions

The gluing process is simple, your main task is to make the walls perfectly even, where the border will be fixed.

You will need a building level and a lead pencil.

Proceed like this:

Measure the required height from the floor in several places (of course, the same everywhere);
Place dots in these places and connect the lines to each other;
The place has been determined, which means half the work is done;
Roll out a small roll on the wall and in the right places trim;
Place the pieces with the pattern down, and on reverse side Apply special glue to the border;
You can fold the canvas like an accordion so that the side with glue is inside;
Take the canvas to left hand, straighten the first fold and attach it to the wall;
Smoothing the border from the middle, move towards the edges;
Apply the canvas until it is completely glued to the wall.

It’s great if you purchased self-adhesive borders, this will speed up the process. If you have an ordinary border, the question arises of what glue to use to fix it. Paper borders are glued with glue for the appropriate type of wallpaper; denser ones can be glued with liquid nails or Titanium glue.

Border for wallpaper (video)

DIY wallpaper border: making the decor yourself

If you decide to make a wallpaper border yourself, the most obvious way is to cut a strip from another type of wallpaper. Of course, you need to cut carefully and strictly along the pre-marked line. Any unevenness will be noticeable.

But there are more creative options for making borders. If its length is short, you can build a border from children's photographs. For a child’s or teenager’s room, this is a very original and touching option.

You need to make a strip of a certain width on which children's photos will be pasted. To make the border look aesthetically pleasing, print the photos in decorative frames so that they don’t just stick tightly to each other.

You can make a border for wallpaper with your own hands from:

Fragments of designer cardboard;
Postcards;
Textile fragments;
Self-adhesive film;
Colored fluorescent paper.

And here the most daring ideas can be taken - the border can be laid out from the covers of old records, magazines, posters.

Wallpaper with a border in the interior: important points

There are a few other helpful tips that may come in handy before you get started.

Tips to note:

You shouldn’t stick a border on newly pasted wallpaper; wait a couple of days to avoid unexpected troubles;
Special glue dries quickly, so glue the border in stages;
When cutting, make the pieces a little longer so that the pattern can be compared.

The border serves as a stylish addition to the interior. It seems like a small detail, but the room becomes more elegant.

The delimiter border eliminates the need to use furniture as a zoner. One glued strip visually divides the room into zones, and it usually looks convincing.

It is important not to make a mistake in the palette. Do not confuse cold and warm color schemes; such a substitution will literally hurt the eye.

Specifics of gluing borders for wallpaper (video)

The border is not a new solution, sophisticated, interesting, classic. Modern standard apartments often lack the laconicism, rigor, and sophistication that the border brings to the interior.

Happy interior design!

Border for wallpaper in the interior (photo)

Wallpaper border is a universal decorative element that allows you to decorate uniform walls. various rooms and bring a special charm to any wall decoration.

The edging around the perimeter of the ceiling significantly decorates the joints of horizontal and vertical surfaces.

Placing border strips in the lower third of the walls makes it possible to use wallpaper of various shades in the design of the room, smoothing out color transitions and various imperfections in the wallpaper.

Vertical stripes between different wallpapers emphasize different functional areas internal space large rooms.

Features of different types of wallpaper

Each room has its own functional purpose. In accordance with this, the choice of interior design and wallpaper colors is made.

It is advisable to purchase wallpaper borders after purchasing them yourself. wall materials.

This will allow you to most accurately select the color, texture, size of the decorative canvas, and find the optimal match for wall materials.

In this case, the combination with color and material should be taken into account. flooring, curtains, curtains, furniture. An example of a combination of wall materials with wallpaper borders in the photo below.

We cannot display this gallery. The best way to assess the overall picture of what borders look like for different wallpapers inside special interiors is by looking at photos in bright design catalogs.

It should be remembered that their color should be several tones darker than the general background of the walls.

For patterned wallpaper, plain stripes that match the color are best suited, and plain wall coverings will be decorated with decorative strips with different patterns.

It is important to choose decorative elements from the same materials as the wall coverings themselves.

Today there are the following types of edgings, which have their own characteristics:

paper borders can be glued and removed without any problems. However, they have obvious disadvantages, which are expressed in a short service life and susceptibility to burnout. They are easily damaged due to mechanical stress;
Vinyl edgings are more practical: they are resistant to mechanical stress, do not fade, and can be easily washed with household chemicals. For these reasons, these types of decor are suitable for use in kitchens and inside bathrooms;
acrylic decorative tape has a more attractive price compared to vinyl while maintaining the same characteristics;
textile and velor edges consist of two layers: paper and fabric. Their disadvantages are expressed in poor resistance to moisture, mechanical stress, and strongly absorb dust;
Fiberglass curbs are the most practical: they are resistant to all types of influences and can be used indoors in various rooms.

In addition, decorative edgings vary in width, surface type, designs, and patterns.

The adhesive that allows you to stick different types of borders is also different, and some edges have a self-adhesive layer.

Today, when purchasing wallpaper, the kit often includes corresponding decorative elements that differ in the following parameters:

pattern, style and color combination with the main wall coverings;
sizes, which may vary significantly in different cases;
scope and place of application;
material of manufacture, which must correspond to the main wallpaper;
texture.

Purpose and principles for choosing wall borders

Due to its versatility, wallpaper with a border in the interior is becoming increasingly popular.

Edgings are used to create the design of premises for various functional purposes. They look great in the living room, bedroom, children's room, bathroom, kitchen.

Depending on the type of room, you need to stick on decorative strips with appropriate patterns. Such edges can be glued at different levels of walls.

Wallpaper borders are most often installed around the perimeter of the ceiling. A decorative rim glued to the top of the wallpaper decorates the joints of two different surfaces, emphasizing the height of the ceiling.

The edging, located in the lower third of the wall, smoothly connects the two types of wallpaper. This design of wall coverings decorates rooms with high ceilings, visually making the room more comfortable.

The edging located below along the perimeter of the room protects the wallpaper from dirt and mechanical damage.

In addition, the chosen picturesque ornament can bring a certain fairy-tale atmosphere to the room and fill it with natural landscapes.

A photograph of a room in a catalog can turn on the imagination and activate the creative potential of a person who is going to renovate an apartment or house.

Vertical borders divide the living space into functional zones, highlighting windows, doors, workplace, recreation area.

This design uses a pattern that easily fits with different wallpapers. This design option is most suitable for housing that has a common living space, for example, studio apartments.

Thus, a border can visually expand the space, make it more comfortable, bring an atmosphere of sophistication and natural motifs into the living space, and emphasize the advantages of certain wall coverings.

When choosing a border, you need to focus on certain criteria:

for plain wallpaper, an edge decorated with ornaments would be best suited;
for combined wall coverings, choose the edging of the predominant color;
the wallpaper and border materials must match;
the decorative strip, which is used as a border, must match the style and shades of color with the main wall wallpaper.

Pasting technology

When learning the basics of how to glue a border to wallpaper, you can easily do all the work yourself.

To do this, you will need the following materials and tools from the very beginning:

special brush and roller;
glue in accordance with the type of wallpaper;
scissors;
stepladder if necessary, sticking edges around the perimeter of the ceiling;
work table for cutting strips.

To determine the required number of border strips, you need to measure the length of two adjacent walls of the room and multiply the resulting value by two.

All work should be carried out in two stages: first, the walls are covered with wallpaper, and then, after they have completely dried, the edging must be glued to the finished surfaces.

For ease of work, it is better to cut edges 1 - 1.5 meters long. In accordance with the location on the wall, a narrow or wide border is cut out.

The border is applied in the following sequence:

before starting work, it is important to check the quality and integrity of the surface of the wallpaper;
according to the recipe for preparing the adhesive mixture indicated on the package, make a solution, and immediately before use, mix it again;
on inner side Apply glue to the workpiece and let it soak for 5 - 10 minutes;
After this, press the strip tightly to the place of gluing, paying attention special attention corners: the length of the border should extend onto the adjacent wall, and the adjacent strip should cover the previous one;
After placing the edging on the wall, you must thoroughly clean it of any remaining adhesive to avoid the formation of yellow spots.

Just moisten the self-adhesive border with water and place it on the wall, pressing and smoothing it tightly.

Before use, such material must be checked and, for greater reliability, treated with additional glue.

Thus, the use of curb stripes allows you to create an original beautiful design any room, visually enlarge the interior space of the room and make it more comfortable and pleasant to stay inside.

Wallpaper border (or frieze, edging, edging, border tape) is made from various materials a strip of small width that is glued on top of the wallpaper or in places where it meets other materials. Choosing the right edging is not that difficult. This article describes in detail what you need to consider and what nuances you should pay attention to before buying a wallpaper border.

Stylish borders for wallpaper

Options for combining wallpaper and decorative borders

Often when purchasing wallpaper in addition to the main one finishing material It is proposed to purchase such a decorative element as borders. This product allows you to supplement appearance premises, highlight significant design details, adjust the visual size of the internal space, hide finishing errors, set boundaries at the junction with other materials.

Border tape gives a room a sophisticated look

Almost any specialized wallpaper store has catalogs of border tape. The buyer can choose it independently from the offered assortment. However, many manufacturers greatly simplify the task of choosing by providing one or more border options complete with the wallpaper model.

As a rule, the manufacturer offers two combination options: by color or by pattern. For example, green wallpaper in light colors with floral ornament go well with a white or dark green border with or without the same pattern. In the case of a monochromatic coating, you should opt for a frieze of a similar shade with some kind of print. This addition will enrich the design of the room and make it more sophisticated and attractive.

It is important to choose a border that will harmoniously combine with the wallpaper

Useful advice! In one collection you can find wallpaper and border tape with different patterns. This combination may not look very good in a small room, as it oversaturates the appearance of the walls and draws undue attention to them.

Another option from manufacturers is wallpaper and borders with the same image. For example, the first ones are decorated with large geometric shapes, and the edging is identical in color and shape, but smaller in size. It should also be taken into account that the wall covering should be combined not only with the frieze, but also with other design elements.

Border and wallpaper with the same image

Regarding choice color range It must be said separately that a very colorful tape is appropriate only in rooms where the focus is on the walls. At the same time, there are no plans to even hang cabinets and other furniture elements. However, there is one type of room where the use bright colors justified - children's.

When a child reaches a conscious age, caring parents often want to cover his room with wallpaper on a theme that interests him. at the moment. This is a major mistake, since a young child’s hobbies usually change very quickly. It is much more advisable to choose a border tape “according to your interests.” Replacing it will be much easier, cheaper and faster than completely re-sticking the entire covering in the nursery.

Themed children's room with a bright border

The walls themselves are painted in a neutral, positive color. It is worth remembering that a room that is too bright and provocative can cause anxiety in children.

Choosing a border material for wallpaper

There are several options for making a decorative frieze.

Paper border for wallpaper. This option is affected ultraviolet rays, pigment burnout, as well as mechanical damage during cleaning. Such framing can be used in repairs if relatively frequent changes in the interior of the room. The main advantage is the ease of pasting and removal. All this is worth taking into account before buying a paper border for wallpaper.

Decorating a children's room in soft colors

Vinyl frame. It is more practical, durable, durable, less susceptible to fading, easy to clean with wet cleaning. Vinyl tape is well suited for the hallway, kitchen, bathroom and other places with increased pollution.

Acrylic edging. It includes all the advantages of vinyl, but has a lower cost due to the use of acrylic emulsion.

Textile edge. It has a two-layer structure of paper and fabric, resulting in greater density and durability of the coating.

There are many bright subspecies of paper borders

How to properly place a wallpaper border on the wall

It should immediately be noted that the edging is never glued to the center of the wall. Otherwise, the room visually becomes lower. The ideal location is 1/3 of the height from the floor. In this case, the strip becomes the interface between the wallpaper different types. One of the classic examples of a combination is “striped wallpaper - edging - patterned wallpaper.” The choice can also be made in favor of plain wallpaper, with lighter ones glued at the top and dark ones at the bottom.

The option for placing the frame described above is especially relevant when covering a kitchen. The main factor here is practicality. Often, a more expensive covering is glued to the top of the wall, and special washable wallpaper and vinyl or acrylic edging cover the work area.

Border with vinyl flowers

The most common placement of a decorative border for wallpaper is under the ceiling. At the same time, it partially replaces ceiling plinth. It is necessary to take into account that it is recommended to choose covering the frieze at the very top of the wall only for large spacious rooms. This emphasizes the beauty of the ceiling, makes the room more comfortable and cozy, and adjusts its visual dimensions.

Useful advice! The wallpaper border can be glued vertically. This allows you to visually highlight a certain section of the wall or functional area. You can edge doorways, mirrors, furniture, etc.

Very rarely the border strip for wallpaper is located at the bottom near the floor. This technique can be used if an error was made when measuring the height of the wall and the wallpaper turned out to be short after cutting. There are also cases when low-quality material shrinks when dried.

Border tape visually dividing the wall into two parts

Also, the tape is glued to the ceiling and, like a mirror image, immediately below it on the walls. This arrangement visually adjusts the size of the room and its appearance.

When pasting wallpaper, it absorbs moisture and becomes more susceptible to mechanical stress and contamination. Therefore, you should let them dry thoroughly and only then begin applying the wallpaper edging. The drier the surface, the better the adhesion of the two materials after application.

Combination of vertical and horizontal borders

Border glue polymerizes (dries) fairly quickly. Therefore, in the absence of much experience, the pasting process should be divided into stages. This allows you to avoid situations where the smeared edge has dried out and become unusable. It is also worth making sure in advance that all necessary tools.

Some wallpaper has a pattern with horizontal guides that you need to follow. The lack of parallel between the frame and the main wall pattern can be very noticeable and negatively affect the visual perception of the design.

The location of the curb should be determined in advance

When cutting, the pieces need to be made a little longer, which will allow you to compare the images. This is true for borders with a pattern.

It is necessary to carefully check the surface of the walls on which you plan to place the tape. Any irregularities will appear sooner or later due to the thin material used. It is necessary to cover up all irregularities, cracks, and remove any remaining paint or glue.

A stylish border allows you to divide a room into zones

When using self-adhesive wallpaper edging, you should not rely entirely on its quality. Over time, it may begin to fall off. Therefore, it is much more advisable to additionally lubricate the surface with glue when placing it than to solve problems that arise in the future.

Sometimes the wallpaper border is glued end-to-end with the main covering. This is true for varieties with developed or high relief (two-layer wallpaper with embossing or with an additional layer of foamed vinyl). In this case, regular wallpaper glue is used.

The border in the bathroom should be secured with waterproof glue

Necessary tools for applying a border to a wall

To glue the frieze you will need the following tools.

Level. It is very important to maintain a strictly horizontal position of the edge, which allows you to perfectly align the border around the entire perimeter of the room and not spoil the appearance of the interior.

Smoothing roller. Serves to expel bubbles and excess glue. This tool can be replaced with a plastic spatula or soft sponge. However, the roller has an advantage: the likelihood of displacement when smoothing the border wallpaper tape is minimal.

The border tape on a plain wall stands out much brighter than in the picture

Pruning knife . It is recommended to use a utility knife and a ruler, which allows you to more accurately cut the tape along the intended lines. It will also be needed when combining patterns and cutting off excess.

Brush. The surface on which the frieze is glued must be as clean as possible. A soft brush will help remove dust immediately before pasting.

The border will look good at any height from the floor

Sponge or absorbent cloth . It is needed to remove excess glue from the wall. The fabric should not be fleecy. It is best to use natural white linen or cotton fabric so that the cloth dye does not smear the coating when wet.

Glue roller. Can be replaced with regular paint brush. However, it should be taken into account that when pasting, the pile can cause a lot of inconvenience and slow down the work. If one person is engaged in pasting, it will be quite difficult for him to simultaneously hold the smeared frieze and at the same time get rid of the stuck debris.

When gluing borders to different textures, do not skimp on the adhesive.

Wallpaper glue. When choosing an adhesive, it makes sense to additionally consult with the seller at the time of purchase, indicating the material of the frieze and what surface it should be applied to.

Stepladder or table. If you plan to place the border on the walls at the top, then for work you will need a stepladder or a strong table that can support the weight of a person. It is necessary to remove in advance all objects that interfere with movement along the perimeter of the room. This will also reduce the likelihood of further injury from falling from height.

Desk. Necessary for placing the tape when spreading. The working surface must be thoroughly cleaned of dirt and can be covered with plastic film to avoid any contamination during work.

The process of gluing a decorative border for wallpaper

Before you begin basic operations, make sure you have all the necessary tools and materials. Remove all unnecessary items from the room or protect them from accidental contamination, and arrange the work surface conveniently.

A border can decorate any room

Glue preparation. It is strongly recommended that you carefully study the manufacturer's instructions, as some adhesive mixtures are diluted in a non-standard manner. According to general rules, the dry mixture is placed in a container with water and mixed slowly. The subsequent infusion process takes approximately 20 minutes. After this time, the glue is mixed again until a homogeneous mass without lumps is obtained.

When using glue mixed with acrylic mass, mixing with water is not required. This material can be used immediately. It should be noted that thanks to the acrylic base, ideal adhesion to the surface is ensured.

Cute one border option for a nursery

Pay attention! Improper preparation of the adhesive will subsequently affect decorative features borders for wallpaper. Therefore, it is worth treating this stage responsibly. Otherwise, the tape will have to be re-glued.

Marking. In order for the edging to be glued evenly, you need to mark it in advance with a simple pencil its location. This will greatly speed up and simplify subsequent work and make the result ideal. For marking, use a level and a long ruler (or other smooth drawing guide). The greater the distance between two points when drawing lines, the less likely there are deviations.

Designers often use a border to zone a room

An interesting approach that significantly speeds up the process of drawing lines is the use of a guide line. In this case, you can mark an arbitrarily long wall in one step. However, such work requires at least three people: two to maintain the guide and one to draw.

Tape cutting. This stage is very simple, but requires special care. After the surface is marked, measurements are taken and pieces of border tape for wallpaper are cut. If the length is chosen with a small margin, the process of combining joints can be significantly simplified. Excess can be carefully trimmed off immediately after placement on the wall.

You can decorate the border yourself with decorative elements

Applying glue. The adhesive is applied to the border tape with a brush or roller. The greased edge is left for 5-10 minutes. This time can be used to once again go over the surface of the wall with a brush and remove any settled dust.

Applying edging. The wallpaper border is carefully placed on the wall according to pre-made markings. When gluing in corners, the end of the tape should touch the adjacent wall. The next strip is glued overlapping, the allowance is 5-10 mm. This avoids gaps. You should not make sudden movements or strong bends. Otherwise, the border may tear.

Border and two types of wallpaper from one collection

After application, using a special roller (or clean cloth), air bubbles and excess glue are expelled from under the material. Next, excess glue is carefully removed with a cloth or sponge. After the entire perimeter of the room has been processed, the border glued to the wall should dry well. Drying time depends on the adhesive chosen, but often takes up to 24 hours.

Border for wallpaper around the perimeter of the openings

Highlighting door or window openings with decorative tape will become spectacular decoration and an addition to the overall design of the room. The main difficulty here is that the pieces of tape need to be connected at an angle of 45 degrees.

An example of a border for a stylized office

To get a perfect joint, you need to place the vertical and horizontal strips overlapping, one on top of the other. Immediately after this, place a ruler along the line of the future joint (diagonally) and draw it with a sharp knife, cutting both layers. Next, bend the edges and remove the trimmings. After this, return the parts of the joint to their original position and carefully smooth them out, removing excess glue.

Selecting and applying a border to a wall is a simple task that even someone who is doing it for the first time can do. However, it is worth remembering: what seems new in theory is original idea– in practice it can give results that are far from expected. Therefore, it makes sense, if not to be guided, then at least to take into account the generally known rules and recommendations of experts.

With the help of a special strip for walls, it will not be difficult to successfully decorate the room, creating a comfortable and cozy atmosphere of completeness. Wallpaper border is used to delimit, expand, and also reduce a room. For example, if it is necessary to emphasize the ceilings, a similar strip is glued at the top at the junction between the wallpaper and the ceiling. If several types of wallpaper material are used in a room, it can be used to easily separate different zones, creating an unusual atmosphere in the interior.

A similar decorative element is used to delimit walls in different rooms Houses. For example, it is impossible to do without it if there is a need to take care of play area in the nursery. Children's border is a colorful and bright material with drawings of your favorite characters. There are many options for this material for the bedroom, living room or kitchen, so it won’t be difficult to choose the right colors.

The main features of the location of the border on the wall:

Top of the wall. The stripe is presented in the form of a decorative edging, which creates a cozy atmosphere in the room.
Ceiling perimeter. Here the border is a separator and zonator.
Right on the floor. It is considered a great way to hide blemishes.

Some owners stick the wallpaper border vertically. This makes it possible to separate a certain zone. Sometimes similar application necessary for framing doors, windows or mirrors.

Wallpaper borders: self-adhesive and other types of materials

Today, many manufacturers make wallpaper borders with identical patterns, but they differ in size and material.

Large assortment modern wallpaper often makes it difficult to choose. How not to get confused and accept the right decision Our material will help you:

Below are the types of borders for walls, which are divided:

By size. The width of the curb may vary significantly. It varies from a few cm to a meter. A standard roll holds 5-10 meters of material.
By color. Some products are plain, while others have designs.
By type of fastening. There are self-adhesive borders - these are special borders on which a special adhesive substance is applied. Such products have a special protective film, so the material is easy to use even for a beginner. When gluing other models, it is enough to moisten the material with water (the glue is applied to them during production). Other types must be treated with glue intended for these purposes.
By texture. Some products are smooth, while others have a variety of embossing.
According to external features. There are simple borders for wallpaper (regular pattern or holographic pattern), as well as decorative models (lace or gilded).
By topic. For a certain room (kitchen or children's room) in the house there are the most suitable models, with corresponding drawings.

In addition to the above characteristics, wallpaper borders differ in material.

Paper

They belong to the budget category and are easy to use. However, this material is short-lived and cannot be washed.

Vinyl

They are considered to be of higher quality, easy to clean and adhere to. Such decorative products will last for many years. This type of baguette is recommended for use in rooms with increased pollution (kitchen, bathroom or dressing room). They have a porous base, which allows the walls to “breathe”.

Acrylic

Borders made from this material have high quality and have a lot positive characteristics. Here a special acrylic emulsion is applied to the surface of the strip.

How to make a wallpaper border with your own hands

Some owners prefer to make their own border for the walls. The most common way is to use other wallpaper. It is necessary to mark a line of the required width in advance and carefully cut a strip along it.

Interesting! To make an unusual border for wallpaper, you can use a variety of piece materials, as well as decorative plaster.

But there is a more creative approach to the process of making a border with your own hands. If this product should be small size, you can do it using photographs. This option will be an excellent solution for decorating a children's room.

Most suitable materials To create this wall detail yourself are:

Postcards or pieces of cardboard;
Textile materials, as well as colored sheets of fluorescent paper;
The film is self-adhesive.

Modern designers also use old magazines, posters, and covers from old records to create unusual borders for wallpaper. The result will depend entirely on the imagination and efforts of the decorator.

Wallpaper for the bedroom should have a calming effect. What color should this wallpaper be? The answer to the question is in our article:

How to glue a border to wallpaper: application features

You should not start pasting the border until the wallpaper is completely dry. Indeed, unlike a dry surface, the strip will not adhere well to wet material.

When choosing glue for this product, it is recommended to give preference to glue made on an acrylic base. Because it can be used without dilution with water. Plus, the tube comes with a special brush applicator and this glue is very durable.

The whole process of covering walls with wallpaper border is not difficult. However, it is necessary to take care of perfectly smooth surfaces in advance. It is also recommended to use a building level. Using a pencil and level, you need to mark the height of the product. It must be the same everywhere.

After this, you should break the roll into pieces of the required length. Each piece of the piece is then laid face down to apply the adhesive. To facilitate the process, it is recommended to fold the canvas in the form of an accordion (when there is a side with glue applied to it inside).

All that remains is to apply the strip evenly to the wall and smooth it out well. When smoothing, it is better to move from the middle of the border to its edges. It is important to ensure that the canvas is completely glued.

Important! Each border strip should be combined with the previous one. In the corners, these products must be glued with an overlap.

Pasting wallpaper borders (video)

Wallpaper borders have been used for decoration for decades different rooms. In addition to the fact that this product is used to advantageously emphasize a certain area in the room, it can be used to hide minor defects walls At self-production borders manage to achieve the most unexpected decor options.

Borders for wallpaper (photo)

A wallpaper border (or frieze, edging, edging, border tape) is a strip of small width made from various materials, which is glued on top of the wallpaper or in places where it meets other materials. Choosing the right edging is not that difficult. This article describes in detail what you need to consider and what nuances you should pay attention to before buying a wallpaper border.

Often, when purchasing wallpaper, in addition to the main finishing material, it is suggested to purchase a decorative element such as borders. This product allows you to complement the appearance of the room, highlight significant design details, adjust the visual size of the internal space, hide finishing errors, and set boundaries at junctions with other materials.

As a rule, the manufacturer offers two combination options: by color or by pattern. For example, light green wallpaper with floral patterns goes well with a white or dark green border with or without the same pattern. In the case of a monochromatic coating, you should opt for a frieze of a similar shade with some kind of print. This addition will enrich the design of the room and make it more sophisticated and attractive.

It is important to choose a border that will blend harmoniously with

Useful advice! In one collection you can find wallpaper and border tape with different patterns. This combination may not look very good in a small room, as it oversaturates the appearance of the walls and draws undue attention to them.

Regarding the choice of colors, it must be said separately that a very variegated tape is appropriate only in rooms where the focus is on the walls. At the same time, there are no plans to even hang cabinets and other furniture elements. However, there is one type of room where the use of bright colors is justified - the children's room.

When a child reaches a conscious age, caring parents often want to cover his room with wallpaper on a theme that interests him at the moment. This is a major mistake, since a young child’s hobbies usually change very quickly. It is much more advisable to choose a border tape “according to your interests.” Replacing it will be much easier, cheaper and faster than completely re-sticking the entire covering in the nursery.

The walls themselves are painted in a neutral, positive color. It is worth remembering that a room that is too bright and provocative can cause anxiety in children.

Choosing a border material for wallpaper

There are several options for making a decorative frieze.

Paper border for wallpaper. This option is susceptible to ultraviolet rays, pigment fading, and mechanical damage during cleaning. Such a frame can be used in renovation if relatively frequent changes in the interior of the room are expected. The main advantage is the ease of pasting and removal. All this is worth taking into account before buying a paper border for wallpaper.

Vinyl framing. It is more practical, durable, durable, less susceptible to fading, and is easy to clean with wet cleaning. Vinyl tape is well suited for the hallway, kitchen, bathroom and other places with increased pollution.

Acrylic edging. It includes all the advantages of vinyl, but has a lower cost due to the use of acrylic emulsion.

Textile edging. It has a two-layer structure of paper and fabric, resulting in greater density and durability of the coating.

How to properly place a wallpaper border on the wall

It should immediately be noted that the edging is never glued to the center of the wall. Otherwise, the room visually becomes lower. The ideal location is 1/3 of the height from the floor. In this case, the strip becomes the interface between different types of wallpaper. One of the classic examples of a combination is “striped wallpaper - edging - patterned wallpaper.” The choice can also be made in favor of plain wallpaper, with lighter ones glued at the top and dark ones at the bottom.

The most common placement of a decorative border for wallpaper is under the ceiling. At the same time, it partially replaces the ceiling plinth. It is necessary to take into account that it is recommended to choose covering the frieze at the very top of the wall only for large spacious rooms. This emphasizes the beauty of the ceiling, makes the room more comfortable and cozy, and adjusts its visual dimensions.

Useful advice! ABOUT The wallpaper border can be glued vertically. This allows you to visually highlight a certain section of the wall or functional area. You can edge doorways, mirrors, furniture, etc.

Related article:

Types of wallpaper. How to choose wallpaper for apartment rooms: living room, bedroom, children's room. Wallpaper for walls: catalog of photos and prices various types wallpaper

Also, the tape is glued to the ceiling and, like a mirror image, immediately below it on the walls. This arrangement visually adjusts the size of the room and its appearance.

Tips for preparing and applying wallpaper borders

When pasting wallpaper, it absorbs moisture and becomes more susceptible to mechanical stress and contamination. Therefore, you should let them dry thoroughly and only then proceed with application. borders for wallpaper. The drier the surface, the better the adhesion of the two materials after application.

Border glue polymerizes (dries) fairly quickly. Therefore, in the absence of much experience, the pasting process should be divided into stages. This allows you to avoid situations where the smeared edge has dried out and become unusable. You should also make sure you have all the necessary tools in advance.

When cutting, the pieces need to be made a little longer, which will allow you to compare the images. This is true for borders with a pattern.

Necessary tools for applying a border to a wall

To glue the frieze you will need the following tools.

Level. It is very important to maintain a strictly horizontal position of the edge, which allows you to perfectly align the border around the entire perimeter of the room and not spoil the appearance of the interior.

Smoothing roller. Serves to expel bubbles and excess glue. This tool can be replaced with a plastic spatula or soft sponge. However, the roller has an advantage: the likelihood of displacement when smoothing the border wallpaper tape is minimal.

Brush. The surface on which the frieze is glued must be as clean as possible. A soft brush will help remove dust immediately before pasting.

Sponge or absorbent cloth. It is needed to remove excess glue from the wall. The fabric should not be fleecy. It is best to use natural white linen or cotton fabric so that the cloth dye does not smear the coating when wet.

Glue roller. Can be replaced with a regular paint brush. However, it should be taken into account that when pasting, the pile can cause a lot of inconvenience and slow down the work. If one person is engaged in pasting, it will be quite difficult for him to simultaneously hold the smeared frieze and at the same time get rid of the stuck debris.

Wallpaper glue. When choosing an adhesive, it makes sense to additionally consult with the seller at the time of purchase, indicating the material of the frieze and what surface it should be applied to.

Stepladder or table. If you plan to place the border on the walls at the top, then for work you will need a stepladder or a strong table that can support the weight of a person. It is necessary to remove in advance all objects that interfere with movement along the perimeter of the room. This will also reduce the likelihood of further injury from falling from height.

Desk. Necessary for placing the tape when spreading. The working surface must be thoroughly cleaned of dirt and can be covered with plastic film to avoid any contamination during work.

The process of gluing a decorative border for wallpaper

Glue preparation. It is strongly recommended that you carefully study the manufacturer's instructions, as some adhesive mixtures are diluted in a non-standard manner. According to the general rules, the dry mixture is placed in a container with water and mixed slowly. The subsequent infusion process takes approximately 20 minutes. After this time, the glue is mixed again until a homogeneous mass without lumps is obtained.

Pay attention! Improper preparation of the glue will subsequently affect the decorative features of the wallpaper border. Therefore, it is worth treating this stage responsibly. Otherwise, the tape will have to be re-glued.

Marking. In order for the edging to be glued evenly, you need to mark its location in advance with a simple pencil. This will greatly speed up and simplify subsequent work and make the result ideal. For marking, use a level and a long ruler (or other smooth drawing guide). The greater the distance between two points when drawing lines, the less likely there are deviations.

Tape cutting. This stage is very simple, but requires special care. After the surface is marked, measurements are taken and pieces of border tape for wallpaper are cut. If the length is chosen with a small margin, the process of combining joints can be significantly simplified. Excess can be carefully trimmed off immediately after placement on the wall.

Applying glue. The adhesive is applied to the border tape with a brush or roller. The greased edge is left for 5-10 minutes. This time can be used to once again go over the surface of the wall with a brush and remove any settled dust.

Applying edging. The wallpaper border is carefully placed on the wall according to pre-made markings. When gluing in corners, the end of the tape should touch the adjacent wall. The next strip is glued overlapping, the allowance is 5-10 mm. This avoids gaps. You should not make sudden movements or strong bends. Otherwise, the border may tear.

Border for wallpaper around the perimeter of the openings

Highlighting door or window openings with decorative tape will be an effective decoration and addition to the overall design of the room. The main difficulty here is that the pieces of tape need to be connected at an angle of 45 degrees.

Selecting and applying a border to a wall is a simple task that even someone who is doing it for the first time can do. However, it is worth remembering: what in theory seems like a new, original idea can in practice give results that are far from the expected. Therefore, it makes sense, if not to be guided, then at least to take into account the generally known rules and recommendations of experts.